Blade Grinding Machine

WINTER GRINDER 1000

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Total power requirement 0 kw Nedpevz Hgbjfx Agwecp

Condition: reconditioned (used), Year of construction: 2005, operating hours: 6,000 h, functionality: fully functional, saw blade diameter: 810 mm, grinding wheel diameter: 125 mm, CHP250 is an automatic machine for grinding the complete tooth geometry of carbide-tipped circular saw blades. Version with two CNC axes and a full enclosure. Technical specifications: Circular saws Outer diameter: 80 to 810 mm Bore diameter: 10 to 220 mm Blade thickness: up to 8 mm Tooth pitch: 6 to 120 mm Rake angle: -30° to +50° Clearance angle: 5° to 45° Tooth height difference: up to 3 mm Back rake bevel: up to 45° Face bevel: up to 15° Grinding path: up to 20 mm Grinding wheel diameter: 125 mm CHP250 On the CHP250, two CNC axes control the bevel grinding and the infeed of the grinding wheel. This is a prerequisite for grinding any tooth geometry on the front (face) or back (flank) of the tooth in a single pass. Nodjykmxtspfx Agwjcp Central lubrication and exhaust system are included. For effective coolant (oil or emulsion) cleaning, a Seitz-brand band filter system from 2010 is included. Up to 3 machines can be connected to the unit. The base is made of stainless steel. The condition is very good.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Ncjdsvz Hfwepfx Agwep Total power requirement 1,6 kw

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Ncsdpfxsv N Eiqe Agwjp

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm ===== 4x eyebolt for suspension Njdpfx Asd Dy S Dsgwecp Rubber band GB30 Magnetic dimensions: 1200x500mm

Year of construction: 2019, condition: ready for operation (used), An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible. Ncodow I E Eajpfx Agwep

Condition: excellent (used), VK450 2RE log peeler.Equipped with two rotors. One is a stump rotor. The other is the peeling rotor. Min-max tree diameter 8-45 cm. Min tree length 3 m. Complete with original VK centring conveyor. Ncsdpsulv Hzjfx Agwsp To be sold after overhaul.

Condition: excellent (used), Band saw welder Viscat model FW400 Njdpjwup U Tsfx Agwocp

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Njdpfx Agjvuhumswecp Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² Njdpfx Aewrp Emegwecp - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las