Westfalia CSA1-06-475 Stainless Steel Centrifuge

WESTFALIA CSA1-06-475

Condition: used, Year of construction: 2020, Overview  This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data  Brewhouse capacity: 5 hl Design: 2-vessel brewhouse Heating: Steam-heated Control: Semi-automatic PLC (Siemens) with touch panel Fermentation: Open fermenters with cooling jackets Scope of Delivery Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) Water Mixing Station | — | — | 2020 | Solenoid valve, mixer, meter Brewhouse Control System | Siemens (PLC) | — | 2020 | Semi-automatic, recipe control Steam Generator | — | — | 2020 | Gas-fired, incl. water treatment, TÜV & CE Open Fermenters (2x) | Speidel | — | — | 625 L each, with cooling jacket Horizontal Storage Tanks (5x) | — | — | — | 500 L each Hot Water Tank | — | — | — | 700 L, insulated, electric heater Cold Water Tank | — | — | — | 700 L, insulated, cooled Water Cooler | — | BL 040 | — | 1.8 kW, cooling & heating function Fermentation Temperature Controllers (3x) | Cube Plug | — | — | — Mobile Pump | — | — | — | — Brewery Accessories | — | — | — | Beer hoses, kegs (30 L & 50 L), misc. parts Optional: Cold Room with Refrigeration Unit | — | — | — | Single-wall, no cooling jacket   Godjx Nm Sxopfx Amusub

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Guedpfx Aew Tbgdsmueb Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: like new (used), Year of construction: 2017, operating hours: 610 h, functionality: fully functional, 1) 12-STATION RINSER IN 2 PHASES (WATER+AIR) for bottles with a maximum diameter of 115 mm. The rinsing process takes place only when bottles are present. The parts of the rinsing nozzles have no contact with the bottle neck. 2) 12-STATION ELECTROPNEUMATIC HIGH-PRESSURE FILLER for bottles with a maximum diameter of 115 mm The fill level can be electrically adjusted from the control panel without manual intervention from 25 to 100 mm below the bottle neck. Each filling valve is equipped with a sterilization bottle for cleaning and sterilizing the machine. The sterilization bottles are positioned manually. The filling valve operates with still and carbonated liquids from 0 to 8 bar. The fill level is precise 100 %. 3) MONOHEAD Crown Capper for D26 crown caps. Screw Cap can be installed for an additional fee Feeding and transfer between stations is performed by screw that guide and synchronize the bottles. Monoblock equipped with: - Protective enclosure compliant with CE standards, featuring tempered glass doors - Universal screw - Motor-adjustable side guides - Dummy bottles for sterilizing the rinsers - PLC and TOUCHSCREEN control panel - Electric height adjustment of all stations OPTIONS: - Washing of the bottles on exit using 7 nozzles, - Interior lighting with 4 LED strips - Machine equipped for remote assist. Gusdpfx Asyukiwomuob Capacity*: 1,100 liters/hour Speed: 1,000 - 3,000 bottles/hour (INVERTER) * Actual capacity depends on several factors: A) Liquid B) Filling temperature C) Bottle pressure D) Bottle type With Filler we will give for free also the packing table

Condition: used, Year of construction: 1977, functionality: fully functional, power: 4 kW (5.44 HP), rotational speed (max.): 9,200 rpm, input frequency: 50 Hz, Westfalia centrifuge/separator type SA7-06-076 with control cabinet (electronic control) 9,200 rpm; year 1977, serviced annually; includes relevant tools, spare seals, and operating manuals. (Unit has been dismantled, cabling not included.) Ideally suited for mobile juice presses (lightweight, compact size, relatively low power consumption). Guodew S Dqcspfx Amuob

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 35/1997, Beer pasteurizer - Heat exchanger Manufacturer APV TYPE / Year 35 / 1997 Guodpfjquuxuox Amusb Capacity 8000 Kg /h Working Pressure 16 bar Max working temp 95 *C

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety Guedpfx Amsw Hr Aweuob This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Year of construction: 2014, Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Spadoni | 1.5hl with Tangential Entries Mixing Tanks | 1.5hl with Tangential Entries 2x Isobaric Fermenters | Spadoni | 2.5 bar 15hl 2x Isobaric Fermenters | Spadoni | 2.5 bar 30hl 2x Atmospheric Fermenters 1bar Pressure 1.2hl | BREW TECH Atmospheric Fermenters 1bar Pressure 1.2hl, (Jacketed) | BREW TECH Gsdpfx Amstka Aqjujub

Condition: ready for operation (used), Benhil machine for packing dairy products Guedovq Rkvspfx Amueb

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Gujdpfx Asl Hxmdsmueb

Condition: like new (used), functionality: fully functional, TURBO D100P46 H086 ID.NO. 2920 Godpfev Iz I Hox Amueub Turbo filling machine mod D100P46 H 086 Perfect for portioning sauces, salads, soups etc. with very easy to use. Dimensions 115 x 60 cm H 170 cm.