Coordinate measuring machine

Wenzel LH 86

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Leasing possible. (All prices are NET) Bdedpfxovpdhxs Akqod

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control FANUC Bdedet Hw H Ejpfx Akqed total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: new, Year of construction: 2023, operating hours: 10 h, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 50mm /160mm Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Bdsdpfxjtw Uzvj Akqjd Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven ER16 modular drilling/milling spindles - Power: [kW]: 1.1 (S6000) - Front drilling unit for 5 drilling quills diameter 25 mm Cross slide counter spindle - Quantity: 2 driven drilling/milling spindles ER16 modular - Power: [kW]: 1.0 (S6000) Back machining 6 driven tools axial ER16 2 driven tools radial ER16 3 turning tool holders 12x12 XD20III 1.0 kW (Fanuc) 1.02 kW (Siemens) TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc 0i-TF Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder Interface for JBS ACCESSORIES / INCLUDED Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (maintenance and operating instructions incl. parameter list and test log)

Condition: good (used), Year of construction: 2014, DMG MORI DMU 50 Technical Features of this 5-axis machining center Manufacturer: DMG Model: DMU-50 Year: 2014 3D CNC Control: HEIDENHAIN ITNC530 SMART NC Screen Type: DMG ERGOLINE® CONTROL 19” NC Swivel Rotary Table Simultaneous: INCLUDED Table Surface: 630×500 mm Max Weight Allowed on Table: 250 kg / pallet Turning Table (C Axis): 0.001º (±360º) Axis: Longitudinal Traverse (X Axis): 500 mm Cross Traverse (Y Axis): 450 mm Vertical Traverse (Z Axis): 400 mm Rapid Feed (X/Y/Z Axis): 42,000 mm/min Working Feed (X/Y/Z Axis): 10,000 mm/min Tilting Range (B Axis): -5º/+110º Spindle: Spindle Speed: 10,000 r.p.m. Taper: SK40-DIN 69871 Main Motor Power: 25 kW Automatic Tool Changer (ATC): ATC Positions: 60 Max Tool Length: 300 mm Equipment: Chip Conveyor: INCLUDED Active Control Cabinet Cooling: INCLUDED Tool Touch Probe: INCLUDED Direct Measuring System: INCLUDED Flushing Gun: INCLUDED Portable Handwheel: INCLUDED Suction System: INCLUDED Internal Coolant: INCLUDED Bjdpfoy Smynex Akqjdd Coolant Deposit with Paper Filter: INCLUDED Others: Machine Dimensions (L x W x H): 5,100 × 3,200 × 2,750 mm Total Power: 27 kVA Machine Weight: 4,500 kg Price on request

Condition: ready for operation (used), Year of construction: 2015, operating hours: 12,244 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, total height: 1,620 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: 840D-SolutionLine, number of slots in tool magazine: 16, number of axes: 2, This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Additional equipment • Full splash guard cladding + coolant unit • Work area light + pneumatic equipment • Panoramic window for optimum visibility into the work area Machine Benefits Technical Machine Benefits Bsdpfx Akox D E Hnoqedd • Center distance: approx. 600 mm • Max turning diameter: 310 mm • Torque: main spindle (fanuc, s6 40%) 178 nm, main spindle (siemens, s6 40%) 301 nm • Quill stroke: 120 mm • Adjustment travel: 475 mm • Speed of rotating tools: 6000 1/min • Driven tool power: (fanuc, 30 min) 3. 7 kw, (siemens, 40%) 6. 0 kw Extra Information Media Pneumatics max. operating pressure: 10 bar Normal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Unit Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feed (electric) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Bdedpfx Akowzwu Ieqod Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 5,000 mm, total width: 3,000 mm, overall weight: 12,700 kg, spindle motor power: 18,000 W, DMG DECKEL MAHO DMF 180 travelling column machining center,equipped with Heidenhain iTNC 530 control.Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure.Table size approx. 2,100 x 700 mm.Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h Spindle performance: 18 kW Control: Heidenhain iTNC 530 ShopMill Travel Y-axis: 700 - mm Tool Changer: Yes Dimensions (LxWxH) approx.: 5000 x 3000 x 3000 mm Tool holder type: SK 40 Travel Z-axis: 700 - mm Weight approx.: 12,700 kg Travel X-axis: 1800 - mm Grinding spindle speed: 14000 - rpm Year of construction: 2,011 Bodpfx Aoy Tkdgskqodd Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 20194, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, power: 49 kW (66.62 HP), Features High rigidity for heavy-duty machining Bsdjx S Hgzopfx Akqedd Large table for oversized workpieces CNC control with HEIDENHAIN TNC 530 for precision operations Automatic tool changer with 50 positions Centralized lubrication and hydraulic system

Condition: ready for operation (used), Year of construction: 2012, Main Drive Bjdpfxox D I Rpo Akqedd Number of axis 5 This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Bedpfx Asxw R Nnskqjdd