Attachment block broom - KEHRFIX

Weber Baumaschinen und Fahrzeuge GmbH KehrFix Anbaublockbesen von 1,50 bis 4 m

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Fgsdpoqt Dmysfx Ambsd The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Fjdpfoq N E U Asx Ambsgd Number of working hours 270 h electrical ja

Condition: used, machine/vehicle number: 78261, Folding machine MB multipli-cas 524 Serial-No. 78261 Fodpfxsh Axynj Ambjgd Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, machine/vehicle number: 19085, Falzmaschine - Folding machine Stahl T50/4-4-SAK66Year 1991 - Serial-No. 44429/91-184041 Fedpfxoh Axvcj Ambegd Folding Size min. 100 x 150mm Folding Size max. 500 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm Pile height max. 690mm Stream delivery SAK 66 Include Compressor Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg Fjdpjc R S E Sofx Ambogd

Condition: good (used), 580 USED Revent rotary oven for 60x80 sheets. The oven is in good condition, dismantled. EXTERNAL DIMENSIONS (in cm): -W: 248 -L: 176 -H: 245 EQUIPMENT: - used oil burner, - stainless steel housing. Fgjdpfx Amjlk Ef Iebsd The DIMSANTLED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN, RUSSIAN.

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: - Max. working length 3500 mm Fjdpfjip Nikjx Ambegd - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Condition: new, table length 1220 mm table width 760 mm table height 910 mm Fsdpfx Aoxqrhlembsgd weight 226 kg

Year of construction: 2000, condition: good (used), Pressing force 28 t Fodpfx Aei Eld Uombjgd X-axis 2000 mm Y-axis 1000 mm Machine weight approx. 11000 kg

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Halbkabine Kühlmittelbehälter Handbuch Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Gesamtleistungsbedarf 8 kW Fodpfx Amsigm Tcjbjgd Maschinengewicht ca. 2,2 t Raumbedarf ca. 2 x 1,9 x 1,95