Spring Coiling Machine

Wafios FTU 3.3

Condition: used, 25/11/2025 Minimum wire diameter: 3.0 mm Maximum wire diameter (depending on tensile strength): Laodpfoxr Ncvox Aa Eok up to 6.5 mm at ≤1600 N/mm² up to 7.5 mm at ≤1200 N/mm² up to 10.0 mm at ≤800 N/mm² up to 13.0 mm at ≤600 N/mm² Maximum wire feed speed: approx. 40 m/min Wire feed length: unlimited (limited only by part length and space) Maximum coil diameter (closed ring): 1000 mm Distance from bending head center to machine front panel: 1000 mm (working depth) Minimum distance between two bends: ≥ 3 × wire diameter Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation) Compressed air pressure: 6 bar Compressed air consumption: 1–30 L/min (depending on configuration) Machine weight: approximately 7500 kg

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Lodolf Ek Djpfx Aa Ejak

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: D32L/8358, Offer Number: D32L/8358 Machinetype: spring coiling machine Make: WAFIOS Type: FTU 3.3 Constr. year: 1998 wire diameter: 0,5-6 mm spring diameter: 20 mm Lasdpfxswi Ucfe Aa Eek feeding length: ∞ output pieces/min: 80 Location: In our warehouse

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D32L/8406, Offer Number: D32L/8406 Machinetype: spring coiling machine Make: WAFIOS Type: FTU 3 Constr. year: 1987 Lsdpfxswzktko Aa Esak wire diameter: 0,5-6 mm spring diameter: 20 mm feeding length: ∞ output pieces/min: 80 Location: In our warehouse

Condition: new, CNC spring forming machine. A proven machine that every spring manufacturer should have in their spring workshop for one of the best ratios on the market. Laodpstv D Awjfx Aa Eek

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm Ledsz N Amopfx Aa Ejak weight: ca. 1800 kg

Condition: excellent (used), Year of construction: 2012, loading capacity: max. 1.500 Kg. Laodovam Iispfx Aa Ejk wire diameter range: 0,5 - 9,0 mm coil outside diam. max. 1.000 mm coil inside diam. min. 300 Kg. speed: 0 - 80 U/min

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Ledsu Szucjpfx Aa Esak Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Laodpour N Dajfx Aa Ejk Year of construction 1970 The machine is ready for immediate use!

Year of construction: 1995, condition: ready for operation (used), A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple stroke device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, spring outer diameter: 2mm-30mm, production capacity: 400 springs/min, max. material strength: 2400N/mm², spring outer diameter range: 2mm-30mm, wire feed length: 30mm/470mm/770mm/1200mm. Machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm, weight: approx. 1000kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible. Lasdpfx Aaev Ip Sms Ejk