Mobile excavator

WACKER Neuson EW 65 Powertilt 30 km/h ZSA VOLL!

Condition: used, Year of construction: 2020, operating hours: 5,000 h, * Liebherr R920 Compact LC tracked excavator * Year of manufacture: 2020 * 4,990 operating hours * 22,400 kg * 110 kW * OQ65 fully hydraulic quick coupler * Variable-geometry boom * Blade * Central lubrication system * Refueling pump * Air conditioning * 3 m undercarriage width * 75 cm track pads * 180° camera Hjdpfszbwn Hsx Ac Tjt * Undercarriage in very good condition * Maintained according to service schedule

Condition: ready for operation (used), Year of manufacture: 2009 No power take-off (PTO) Air conditioning Front linkage, tipping body at the front and rear, hydraulics, all-wheel drive, hydrostatic drive, ready for use. Optical defects, see pictures. Preferably sold to dealers or for export. Errors and omissions excepted. Pictures/description may vary. Hedpfx Acewvf Avj Tst

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 5,230 kg, first registration: 06/2023, mast type: mono, Year of construction: 2023, Equipment: air conditioning, rubber tracks, CATERPILLAR 305 CR, year 2023, 3687 hours, weight 5230 kg, 36 kW, quick coupler, hydraulic system for hammer and gripper, original paint, no welding repairs. Hodpjzun Ensfx Ac Tet

Condition: new, empty load weight: 800 kg, maximum load weight: 2,700 kg, overall weight: 3,500 kg, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 350 mm, tire size: 195/50r13c, Three-way tipper PW3.6, 3.5 tons, from the manufacturer *Cheval Liberte or Debon*. This *trailer* can be loaded easily on three sides because it is a *three-way tipper* with folding and removable *side panels*. The front flap allows *long materials* to be loaded through. The load is unloaded from this *tipping trailer* using *electro-hydraulic* technology. Hedpji Ah Tcefx Ac Tot The *car trailer* is equipped with *side panels* made of *aluminum* on all sides, which can be folded down and removed, *steel on a wooden floor*, *electric hydraulics* with a battery, a *rail system*, an *automatic jockey wheel*, a *raised platform*, *tie-down points*, a *welded, hot-dip galvanized frame*, and a *V-shaped drawbar*. As optional accessories for the tipper, we offer loading ramps and rear supports, for an additional charge. In addition, we offer a *grate extension*, a *side panel extension*, a *tarpaulin cover*, a *flat cover, net*, and a *battery charger*.

Condition: used, mileage: 93,937 km, power: 105 kW (142.76 HP), first registration: 09/2021, fuel type: diesel, overall weight: 3,500 kg, color: grey, emission class: euro6, loading space length: 3,300 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, soot filter, Used Vehicle * Vehicle no.: 80 * Euro 6 green emissions sticker * Sprinter 314 CDI, new model, medium wheelbase panel van with high roof * Automatic climate control * 6-speed transmission Hsdpfxev Ugxdj Ac Tjt * Rear-view camera * Rear parking sensors * Cruise control * Multifunction steering wheel * 2 seats * Cargo area lining on floor and walls * 270° rear doors * Electric front windows * Electric mirrors * Central locking * Airbag * ABS * ASR (traction control) * German vehicle, 2nd owner * Original mileage * !!! Optional shelving system for the cargo area available at extra cost !!! ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale only to businesses or for export. The above data, images, and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed specification under sales law! All details and accessory information are provided WITHOUT GUARANTEE. We expressly reserve the right to make changes, interim sales, and errors! The equipment list is not part of the contract and must be individually checked by interested parties in detail on site before purchase. Subsequent complaints will not be accepted.

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. Hodpfsudi Uzex Ac Tot The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Hedpfoupyw Ejx Ac Tst Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 20 Drilling depth: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Overall height: 1,855 mm Weight: 250 kg Motor with pole switching: 0.8/1.5 kW Spindle speeds, stepless Range A: 80 - 1,440 min-1 Range B: 180 - 3,200 min-1 Hjdpeb Eli Hsfx Ac Tst Digital display for speed, standard.

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece Hedpfjxacbusx Ac Tot - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT133-544, DEMAG KBK crane canopy crane runway with dimensions approx. 10.5 x 6m Payload / lifting capacity 500 KG - 0.5to Technical data of the system: Crane runway made of Demag KBK1/2 rails System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets incl. steel 500KG chain hoist - lifting height approx. 3m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Hsdpfx Acoty Sxws Tst Please ask for your crane runway with load capacity and dimensions without obligation.