Vollmer N 174

Vollmer N 174

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 8292, grinding length: 3,100 mm, total width: 1,500 mm, total length: 5,100 mm, total height: 1,800 mm, grinding width: 200 mm, type of input current: three-phase, workpiece weight (max.): 1,000 kg, input voltage: 400 V, grinding spindle speed: 1,800 rpm, coolant pump power: 100 W, grinding spindle motor power: 1,100 W, overall weight: 2,500 kg, grinding wheel diameter: 200 mm, grinding wheel width: 20 mm, table height: 200 mm, table length: 3,100 mm, table width: 200 mm, control cabinet width: 400 mm, control cabinet length: 1,200 mm, control cabinet height: 1,500 mm, New machine, still in original packaging! Bcodpfx Ajx Ezu Tsf Eju

Year of construction: 2019, condition: ready for operation (used), An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible. Bcedpfx Afow I E Eaj Eju

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Bsdpogy Ti Dsfx Af Eocu Point thinning device Dressing attachment MARCELS MASCHINEN CH

Condition: excellent (used), VOLLMER model CNS sharpening machine for firewood saws (CV) Bcsdotwm Uujpfx Af Eou

Year of construction: 1989, condition: excellent (used), Vollmer CHHF 21 H – machine for single-sided grinding year 1989 S/N 907 Manufacture Vollmer Germany in good working condition Technical data of the CHHF 21H at a glance: Circular saw blades Outside diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle to 30 ° Radial clearance angle -7° to +3 ° Tangential clearance angle to 5 ° Connected load appr. 0.52 kW Weight appr. 85 kg Dimensions 70 x 50 x 80 cm This machine was designed especially for the repair of missing carbide teeth. Newly inserted tips are ground in alignment with the existing teeth. With this table-top version, VOLLMER is offering a particularly economical,space-saving solution. The CHHF 21 H uses the wet grinding technique. During the grinding process,the grinding unit is moved manually over the tooth, flanks, the saw blade being positioned by hand against a fixed stop. Bsdpfeixt Hhox Af Eecu The next tooth and then all the remaining teeth can be ground until the required tooth flank dimension is achieved.

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees Bcodsv Sbmqspfx Af Esu max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: like new (used), functionality: fully functional, 1 as-new high-performance knife grinding machine MVM KX 250 – 2100 mm (ex-demonstration unit) * 1-year warranty • Siemens touch screen PLC (control system, spare parts supply guaranteed by MVM) Bjdpex Nhnhjfx Af Escu • Grinding wheel motor 15 kW, 20 HP, 400V, 3-phase, 50 Hz • Grinding wheel diameter: 250 mm • Magnetic rotary table, adjustable from 0 to 90 degrees • Magnetic table width: 150 mm • Magnetic table length: 2100 mm • Vernier indexer for magnetic table rotation +/- 90° • Controls for rapid or slow downfeed of the grinding wheel • Automatic feed controlled by Siemens PLC (0.001 – 0.1 mm) • Fully automatic work cycle (rough grinding, fine grinding, sparking out) • Variable carriage speed: 1 – 30 m/min • Automatic lubrication of PTFE slideways • Coolant injection at center of the grinding wheel plus 2 further nozzles on each side • External coolant tank with pump • Magnetic separator with discs for coolant cleaning • Motorized quick-change flange for fast tool changeover • Variable grinding wheel speed (adjustable to blade, machining phase [roughing, finishing, sparking out], and blade wear) • Automatic approach to workpiece (HSS) • LED lighting • Dimensions: 4.12 x 1.50 x 1.75 m • 1-year warranty

Year of construction: 1985, condition: excellent (used), UT.MA. Universal grinding machine type LC-25F Production UT.MA Italy Year 1985 Technical data: Largest workpiece diameter 250mm Max diameter with vertical clamping head 400mm Longitudinal movement of the table 250mm Transverse movement of the grinding head 200mm Grinding head height adjustment 200mm Grinding head swivels 360 degrees Grinding spindle speed 2800 RPM Power of the motor HP 1 Max grinding wheel diameter 150mm Weight 250 Kg The longitudinal slide runs on a roller guide made of hardened steel. Bsdpfxehcfxpo Af Ejcu Example photo. Original in a nutshell

Condition: used, Year of construction: 2008, The machines are in operation. The linear guides have been replaced. The machines are in excellent condition. Bcsdpoxx Ubwsfx Af Esu