Tugger

Volk DFZ 120H

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models Hfodpfx Asfg E Hpofnec a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2025, condition: new, machine/vehicle number: 747924113, Dipperfox SC600 - the new standard for urban greening. The Dipperfox product family is growing with the new addition - the baby Dipperfox, called SC600. As an original, the Dipperfox 850 Pro is the world's most effective stump removal machine for large excavators, for use in construction and forestry. Our SC600 model carries the performance, but can be be adapted for smaller carriers. The DF600 is a tool for people in cities, municipalities, arborists, and gardens - Where full size crawler excavators are too big to use. The main advantages compared to conventional stump grinders are safety, noise level and efficiency. Because Dipperfox's rotation speed is a maximum of 60 RMP, there are no flying debris and if the blade hits the rock, it is simply pushed away. No need to create large Hsdpfx Aslqak Dofnjfc Safety zones to get the job done. And as a true member of the Dipperfox family, the SC600 does does the same job, but much faster compared to vertical grinders. It can also be used to work up to half a meter below the ground. It is very useful when you need to plant a new tree in the same same place where the original stump was located. Dipperfox SC600 is a multi-carrier tool suitable for the following: * Backhoes between 6 and 14t * Backhoe loaders from 6t * Skid steer loaders and compact track loaders from 6t * Hydraulic pressure 170-280 bar and 65-150 l/min Further information Equipment: shears, Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets Hfedpjgvqz Iefx Afnoc - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Hfedpfsw Eqdqsx Afnoc Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Hjdpfsihpn Nox Afnjfc Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Tyre type front: Pneumatic Hfjdow Eqddspfx Afnoc Tyre size front: 400/70-24 Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light.

Condition: ready for operation (used), Year of construction: 2021, An industrial pasta system Juwel for large-scale production of noodles and similar products is available. Components: drying cell TS-120, noodle machine Pressquick PQ6-SU and noodle machine Pressquick PQ3-SU. Drying baskets: 100, kettle capacity: 12kg, daily capacity: approx. 500kg, hourly capacity: approx. 50kg, total system dimensions X/Y/Z: approx. 2000mm/900mm/2100mm. Documentation available. An on-site inspection is possible. Hodpfjwd Tafox Afnefc

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg Hfsdpfeu Imigjx Afnoc 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism.

Condition: good (used), functionality: fully functional, empty load weight: 6,500 kg, overall weight: 18,000 kg, tire size: 580/65 R22.5, Year of construction: 1996, Model: 16000TS 16.000 liters with suction Hsdstq Uurspfx Afnsfc

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Hedjrah Evspfx Afnjfc Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.