Plate shear

VOEST-ALPINE BT 5x2000

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade Pedpfof Nwxwox Agxogp - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes

Condition: new, plate thickness 1,6 mm 4 t blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm Pgjdpfx Aeftd Uajgxjp

Condition: new, Year of construction: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Overhang: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140 mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Motorized rear stop with linear guide and ball screw Rear stop finger with height adjustment (R-axis, manual) CE upper tool holder system (upper tools) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with worldwide applicable standards Electrical equipment, in accordance with worldwide applicable standards Option: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) Pgjdofifg Hspfx Agxjp CNC motorized crowning Motor power 37 kW Oil tank capacity 250 liters Length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 Pgedpjcxxx Refx Agxjp sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) Pgedpfx Asx D E Dysgxjp • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter cut - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm Psdpfx Aorh Dkyjgxsgp - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Year of construction: 2004, condition: excellent (used), Four-side planer Pgsdohlp D Nopfx Agxjp -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Pedshgiuhjpfx Agxsgp Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Pgodpfxjqgcdts Agxep Dimensions: 185x180x235 cm LxWxH

Condition: repair required (used), Manufacturer: Delta Year of manufacture: 1988 Machine number: 284237 Type/Model: D 140 Centre distance: 700 mm Passage: 38 mm Centre height: 150 mm Swing diameter over bed / over cross slide: 300 mm / 180 mm Speed range: 34 to 1,800 rpm Feed longitudinal / cross: 0.038 to 1.048 mm/rev / 0.019 to 0.524 mm/rev Pgodpsyt Ex Dsfx Agxjp Connection: Accessories/Equipment: 4-position tool holder, change gears, 160 mm 3-jaw chuck, 200 mm 4-jaw chuck Condition: In need of repair Damage: Transport damage, see pictures g + h, handwheel newly welded, gear lever broken off Weight: approx. 1.2 t Dimensions: 1,800 x 700 x 1,200 mm