Wall-mounted slewing jib crane Slewing jib crane Chain hoist

Vetter AW Demag Drehkran Hallenkran Kran Ausladung 7m NL 250Kg DC Kettenzug

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles Fgsdpfjt N Antjx Ab Nsd - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm Fsdpeim Ildefx Ab Njgd - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable - Hydraulic material clamping device - Chip conveyor - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Condition: new, functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner Protec KT 300 H, 170/400 special version with hydraulic height adjustment and safety lock against lowering. Hydraulic platform load capacity 500 kg. Horizontal load 300 kg, tilted load 150 kg. Power supply 220 V, 50 Hz. Table diameter 450 mm, hollow shaft diameter 170 mm, table height 500 mm. Welding current transmission 400 A. Quick-acting chuck diameter 300 mm, surcharge €550. Quick-acting chuck diameter 400 mm, surcharge €750. Mobile hydraulic height adjustment, surcharge €650 (with lockable castors). Counter-support yellow, stepless height adjustment €250. Crank drive motor, 0-90° stepless adjustment. Speed stepless from 0.01 up to approx. 5 rpm. Incl. foot remote control. Digital display with welding time limitation available on request. Fgjdpfx Abswz Rfgo Ned

Condition: excellent (used), Year of construction: 2002, CNC Turning-Milling Center GILDEMEISTER TWIN 500 Linear Year of manufacture: 2002 Siemens control system Technical data: Swing diameter: 610 mm Turning diameter: 610 mm Turning length: 1870 mm Drive power: 69 kW Spindle speed: 3,200 rpm C-axis torque: 650 Nm Fsdpfx Absw Tarfo Negd Main spindle - left Chuck diameter: 250–500 mm Max. bar diameter: 102 mm Upper slide Rapid traverse speed X/Y/Z: 45/24/70 m/min Slide travel X1/Y1605 / 105 mm Turning/milling spindle HSK 63A Max. spindle speed: 12,000 rpm B axis Swivel range B1: 120° Resolution: 0.001° Tool magazine Number of tools: 40 Tool length / Max. quantity: 350/40 mm

Condition: new, 0 8000 kg gear diameter 75 mm 105 mm Width 190 mm length 370 mm height 100 mm loading area rund 100 mm weight Gesamt 70 kg dimensions 800 x 600 x 250 m Heavy-duty castors, 2-part Total load capacity 16 t. Fjdpfjvu E U Djx Ab Njgd with turntable ATTENTION: Only 2 pieces are included in the offer.

Condition: new, 30000 kg length 7000 mm width 2450 mm height 800 mm Fgodjqux S Sspfx Ab Nod lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 34 mm, total length: 230 mm, total width: 2,400 mm, saw band length: 4,700 mm, saw band width: 1 mm, Selling a MEBAMAT 330 Fgjdpjwhix Esfx Ab Nod 12,500 operating hours The machine has cut 99% of plastic. You can find the machine's technical specifications at MEBA.

Condition: new, Year of construction: 2026, Machine type: EVP 30 Manufacturer: ERBA Power kW: 0.95 Total volume: 30 liters Description: Fsdpfjyq Ripsx Ab Nogd The EVP 30 vibratory finishing machine from ERBA is ideal for processing small workpieces or as an entry-level or pilot system. It features a flat work container base without a separation unit. Discharge or separation is carried out via the bottom discharge (manual or pneumatic). The motor speed can be continuously adjusted using a frequency converter (optional). The system can also be equipped with a fully automated PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and longevity, which is also ensured by the heat-cast polyurethane lining of the work bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We are happy to provide you with independent and non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place by means of telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which also includes our general terms and conditions with legal notice and information on the right of withdrawal, before a purchase/contract is concluded.

Condition: excellent (used), Boring bar Bar diameter: 180 mm Overall length: 2500 mm Weight: 920 kg Fsdpjum Uzgjfx Ab Nogd Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2008, machine/vehicle number: 81266- V 80381, Lg.no. 24394 Hydr. rotary and tilting welding table - Four-axis welding manipulator Technical data: - max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. Table height in horizontal position approx. 1070 mm - Face plate can be rotated + swiveled or tilted - Faceplate can be moved horizontally + vertically, travel 1250 mm - Rotation electr. infinitely variable - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Manual remote control for speed regulation - E. foot switch Fgodpsugtiujfx Ab Ned - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg