Machine tools

verschiedenes verschiedenes

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control Nlodjxaa Urspfx Ac Ajg - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Nsdpfxew Imq Re Ac Aelg

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Nljdpfx Aef Hmn Aec Ajg Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW Njdpfx Asu Dbvtjc Aolg weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Nljdpfxeyh R Uwe Ac Asg

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 Njdpfx Acezdf Hvo Aslg - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 with few operating hours Nljdsy Rxtkepfx Ac Ajg It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Nljdpsra Rrhefx Ac Aeg Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Nledpfjd E Np Esx Ac Asg Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as Nledpfx Asynbmmec Ajg a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table