Manual spindle press

VEB Pressenwerk Morgenröthe PSGZ 25

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Fgsdsu N A Easpfx Akksd Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Fedpfx Aoul U Svjkksgd Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Fgedpfx Aok S Htxokkjd Good condition

Condition: used, Year of construction: 1971, pressure 200 t Fedpot Hw Dwsfx Akkogd passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Fodpfx Aovw Spmskkjgd Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: good (used), Table size: 350 x 350 mm. Fsdpofm A Amjfx Akkogd

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Fgsdpfxov Td Ero Akked

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Price reduced. Technical data available on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust hand spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the typical technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the frame size/frame width, and the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle fully raised) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Fgodpfxjwxyn Ee Akksd Design: Solid cast iron stand in a C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel as it is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool mounting. Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolts to the foundation). Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the position of the spindle). Width (stand): approx. 500 – 600 mm. Depth (base): approx. 800 – 1,000 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 20 t, Single-column press – Manufacturer: Durendus – 3–20 t hydraulic press – Table 1000 × 400 mm For sale is a hydraulic single-column press (C-frame) from Durendus with an adjustable pressing force of 3 to 20 t. This compact and robust machine is ideal for assembly, pressing, and light forming operations in the workshop and production environments. ==== Technical data & Information: Hydraulic Single-Column Press – 3–20 t ==== General Information - Manufacturer: Durendus - Model: assembly press / single-column press - Design: C-frame press Fedpjx Ap Utsfx Akkogd - Pressing force: 3 – 20 t (adjustable) - Machine weight: approx. 1,200 kg - Paintwork: RAL 7035 (light grey) / RAL 2009 (orange) ==== Working Area - Max. distance table – ram: 500 mm - Stroke / travel: 500 mm - Table height: 940 mm ==== Table & Ram - Table plate: 1,000 × 400 × 40 mm - Ram: Ø 250 mm, round, interchangeable ==== Speeds - Downstroke speed: 2 – 10 mm/s (adjustable) - Upstroke speed: 20 mm/s ==== Hydraulics - Motor power: 2.2 kW - Oil tank capacity: 60 l - Pump: Agro-Hytos or equivalent ==== Equipment & Operation - Pressure adjustment via rotary knob - Robust machine frame - Control cabinet technology from renowned manufacturers - Emergency stop ==== Documentation & Delivery - CE declaration - German-language documentation - Installation, commissioning, and training available at extra charge ===== Assembly work, pressing operations, workshop applications, small series production, light forming operations Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die set-up press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our major strength is in special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses are equipped mainly with components from leading European manufacturers.

Condition: used, Year of construction: 1968, pressure 40 t throat 200 mm stroke 150 mm table surface area 600 x 300 mm hole in the table Dm. 140 mm ram surface 600 x 300 mm dayligth ca. 325 mm total power requirement kW weight of the machine ca. t Fedpju Dn Shefx Akkogd dimensions of the machine ca. m