Temperature test chamber -72°C to +180°C

Vötsch VTS 7060-5 600 Liter

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Fpedpfxst Txqrj Afnsc Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm Fsdpfx Aswgi Drsfnepc z-travel 400 mm control Heidenhain Mill Plus V600 weight of the machine ca. 7000 kg

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Fjdjxylqxopfx Afnepc Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Fpedpfexdi Ezsx Afnec Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: Fpedpfexcp R Uex Afnec - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Type: WK3-340/70 Weiss Climate Test Chamber, Water-Cooled Control Unit: “Touch Panel” All control and operating commands can be triggered simply by touching the function symbols on the “Touch Panel” control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for uneven floors and to ensure sufficient ventilation of the machine section. Feed-Throughs The test chamber is fitted with feed-throughs on both the left and right sides. These allow measuring cables and test devices to be routed into the test chamber. Feed-throughs included in the basic configuration: R1: nominal width 125 mm L1: nominal width 85 mm Fodpfsxmg Sdjx Afnepc Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: –3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity spatially: ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% RH Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Protection: 16 A slow-blow fuse, to be provided onsite Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data, information and specifications are subject to change and errors.) If you have any further questions, we will be happy to assist you by phone.

Condition: used, Year of construction: 2001, x-travel 2.000 mm y-travel 1.200 mm z-travel 1.400 mm Control Heidenhain 426 spindle tunring speed 3.000 U/min tool taper SK 50 number of tool places 20 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Controlled rotary table - Milling head with stepless positioning along the B-axis - Automatic tool changer with 20 magazine positions - 2x chip conveyors in longitudinal direction, ejection on the left - Coolant system - Fully enclosed - Various tools Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Fpsdpexu Nxvjfx Afnsc

Condition: excellent (used), operating hours: 100 h, PERFECT CONDITION, purchased in December 2016 Used for about 100h New price is 46808 EURO The MKF series environmental simulation chamber from BINDER is ideal for all cold and heat tests, carried out on the basis of recognized temperature and climate test standards in accordance with DIN and IEC. High operating comfort and extensive standard equipment have obvious advantages in everyday use. Key features Temperature range: Fjdpfxsvldnqs Afnopc -40 °C to 180 °C Humidity range: from 10 to 98% relative humidity Integrated 20 L water tank 4 potential-free relay contacts e™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostics system with optical and acoustic alarm Intuitive touchscreen controller with time interval programming and real-time programming Internal data logger, measured values in open format can be read via USB 2 access ports with 80 mm silicone plug, left and right Independent, adjustable temperature protection class 2 (DIN 12880) with optical alarm 4 castors, two with brakes 230 V socket on the side panel on the right Ramp function can be set Integrated line recorder Time clock actual Door heating Alarm message in the event of lack of water in the fresh water tank 1 stainless steel wire shelf Protection against leaking hoses, covering the water supply and discharge pipes up to a height of 1 m Stainless steel interior Halogen-free refrigerant R-404A Cooling provided by a compressor unit

Year of construction: 1999, condition: used, 25 bar, refrigerant R404, 4.2 kg, 11.5 kW Technical data Fedpfxeyfpf Se Afnepc Dimensions (L x W x H) approx. 1880 x 1850 x 1380 mm Weight approx. 840 kg

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Fodpfx Afexzgn Ionopc Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.