Oven

Vötsch VMT 04/140

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, RESERVED 12 months warranty, in stock, available for immediate delivery, in excellent condition Resistance-heated system with a gas-tight furnace chamber suitable for hardening, brazing, sintering, annealing, ashing and preheating. -Tmax 800°C -Rod program controller SE-402 -3-zone heating -Gassing system -Max. gas operating pressure 7 mbar -Gas circulation -Gassing system, vacuum-tight -Gas purging system -Vacuum system -Note: no safety package installed! -Inner chamber dimensions WxDxH 580x830x1500 mm (special length) Lodpfx Aeyxlwropmohi -Chamber volume approx. 722 liters -Max. load weight approx. 1000 kg -Two-stage rapid cooling with frequency converter -Burner with flame monitoring -Automatic shutdown / emergency purging in case of flame failure, not in case of power failure! -Sight glass DN150 -Max. gas operating pressure 7 mbar -Power supply 400V, 3 phases, N, PE -Heating power 70 kVA -Rated current 3x97A -Weight 1900 kg -Outer oven dimensions WxHxD 1700x1950x2750 mm -Control cabinet dimensions WxDxH 510x1360x500 mm -Operating manual, wiring diagrams, CE declaration The furnace is offered as refurbished. Electrically tested, including test reports. Inspection in our warehouse by appointment! The furnace is not suitable for gas nitriding with NH2/ammonia! Furnace, furnaces, industrial furnace, melting furnace, annealing furnace, heat treatment furnace, sintering furnace, protective gas furnace, tempering furnace, hardening furnace, chamber furnace, brazing furnace, debinding furnace, dewaxing furnace, stress-relieving furnace, vacuum furnace, protective gas furnace.

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Lhjdpfexy Ikbex Apmji

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm Lhjdswwlvljpfx Apmei turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Ledpexz Divefx Apmshi

Condition: new, Pressure tanks 270 L/500L/1000L/2000L/,3000L 11bar Lodpfx Apjrbyyhemohi

Year of construction: 2023, condition: like new (used), functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 Lhjdsr Iig Sjpfx Apmoi • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump Lhjdoif Sbiepfx Apmoi -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Year of construction: 2024, condition: new, functionality: fully functional, Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Lsdpfxougfn Ao Apmjhi Material of construction - product contacting parts: stainless steel - non product contacting parts: stainless steel Wear protection: none Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in stainless steel. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP and 50 ZPS. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, Used stainless steel container Last use: Food Article number: 10446 Volume: 5000 liters Type: Standing on 3 feet Material (in contact with media): 1.4301 stainless steel Design: Single-walled Bottom: Arched Top: Arched Operating pressure according to type plate: ATM Lhjdjv Dt Taspfx Apmji Container dimensions: Outer diameter: 1440mm Cylindrical height: 2980mm Height of feet: 270mm Distance from drain to floor: 70mm Total height: 3410mm Total width: 1440mm Materials: Inside: 1.4301 / AISI304 Outside parts: 1.4301 / AISI304 Facilities: Outlet: DN 40mm Manhole: 340x450mm Various connections

Condition: good (used), Year of construction: 2022, machine/vehicle number: H500UT22-04, functionality: fully functional, power: 45 kW (61.18 HP), input voltage: 380 V, input current: 100 A, input frequency: 50 Hz, pressing force: 500 t, stroke length: 500 mm, operating speed: 140 mm/s, reverse speed: 200 mm/s, table width: 1,500 mm, table length: 1,200 mm, overall weight: 22,000 kg, We offer this well-maintained Hidroliksan H workshop press, year of manufacture 2022. Manufacturer: Hidroliksan Model: H Ljdpfx Apey Ickhomjhi Year of manufacture: 2022 Condition: good Class ID: 1124 Type ID: 1309 Type: workshop press If you have any questions or require further information, please contact us by message or telephone.