Welding table with grooves

unbekannt 3030/3000/H500 mm

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer -Mounting plate: with a carriage with clamping device -Quantity: 1 piece (a second plate is still available ID 21154) -Wagon dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm -Length: 4930 mm -Working height: 850 mm Hodjd Ehfmopfx Acgefl -Sheet thickness: 35 mm -Plate height: 300 mm -Plate with: supporting ribs -Groove width: 52 mm -Slot spacing: 292 mm -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/7863, Offer Number: D08L/7863 Machinetype: straightening and cutting machine Make: WAFIOS Type: R51PL Constr. year: 1990 diameter range: 7-14 mm cutting length: 3000 mm speed - meters/min: 90 Location: In our warehouse Hfjdpfxewi S Eqs Acgjl

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. Hfodewzl Hxepfx Acgjl * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: used, diameter div. number 40x Hodpfjww Nbfex Acgefl tool adaptor BT 40

Condition: ready for operation (used), Year of construction: 2019, This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Additional equipment • Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. • Leveling element (1 set = 4 pieces) with stud bolt M 12x100. • Feed side – left. • Feed roller conveyor URB 290, Length 3000 mm. • Feed adapter for URB 290/400. • Outfeed roller conveyor URB 290, Length 2000 mm. • Removal adapter for URB 290/400. • Connecting piece for machine, attachment on the right. • LM 55 M/man. Length stop, Measuring length 2000 mm. Machine Benefits Technical Machine Benefits • Automatic saw with a roller conveyor feed side length of 1500 mm and a discharge side length of 1000 mm. • Sheet metal tray for setting the machine. • Control unit attachment of the control unit to the swivel arm. Hedpfx Asx Nr Sqjcgofl Extra Information Machine still under power

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm * Hodpfxownfu Nj Acgefl

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 295.6 kW (401.90 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,453 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,200 mm, total height: 1,880 mm, warranty duration: 12 months, Watercooled chiller PANASONIC ECOi P WQE1004CA 295.6 kW Cooling capacity: 295.6 kW / 84.05 tons (12/7 — 35°C) Year of manufacture: 2023 Hfjdpfswp Duqsx Acgsl Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410a Dimensions: 2.2x1x1.88 m. Weight: 1453 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, plate width 3000 mm plate depth 2000 mm plate height 230 mm weight of the machine ca. / t Clamping plate Dimensions: 3000 x 2000 x 230 mm Hfjdpfxoud Iw Uj Acgjl T-slot dimensions: 42 x 72 x 74 (H) The images are for illustrative purposes only. More pictures will follow.

Condition: good (used), Year of construction: 2006, total length: 4,000 mm, total width: 2,500 mm, plate height: 300 mm, Manufacturer: PAMA Type: Floorplates Year of manufacture: 2006 2 units available, matching cast iron floorplates/bedplates Integrated levelling chambers Can be used in combination with PAMA SPEEDRAM 1000, Machine 8643 Testing area Mounting area Measuring area Calibration area Specifications Metric / US Standard Length 4000 mm Width 2500 mm Height 300 mm Number of T-slots 10 T-slot spacing 250 mm T-slot size 26 mm Weight per plate, approx. Hodpfx Aewpvcyecgofl 7800 tons Number of matching pieces 2 Dimensions (estimated) Length 4000 mm Width 2500 mm Height 300 mm Weight 7800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual condition. We recommend that you verify all important details.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Semi-automatic compact glass storage system 25 positions Maximum glass size: 3210 x 6000 mm Drawer load capacity: 6000 kg Total loading capacity: 150000 kg (150T) Total floor dimensions: L 6100 x W 9200 x H 3050 mm Hfjdpfxszdylxj Acgjl In very good and clean condition Good working order, tested As is See video