Clamping plate with T slot

unbekannt 1500/3516/H260 mm

Condition: good (used), Year of construction: 2002, operating hours: 43,000 h, machine/vehicle number: V020113, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Iodpouwktnefx Aa Ejtr Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Itsdpfx Aaju N Hc Ne Ejr

Condition: good (used), Cast iron marbles Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Itodpfx Ash Awqgsa Eor Delivered with 6 levelling feet Weight: 7 T 2 same plates available.

Condition: excellent (used), Year of construction: 2011, pressing force: 50 t, working range: 1,600 mm, 1 Used Very Clean Bystronic 1.5metre x 50ton cnc pressbrake for sale - hydraulic down stroke Itedpfsvq N Hcjx Aa Esr Description Year 2011 Pressure 50 ton Bed length: 1.6metre / 1600mm stroke 150 mm Cnc control: CYBELEC DNC 880S 4 axis in total Quick release tool clamps Total power requirement 5,5 kW Weight of the machine 4800 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: P 648, control type: CNC control, oil tank capacity: 290 l, overall weight: 9,500 kg, power: 11 kW (14.96 HP), Built for a globally leading cooperation partner. Last machine from the pool. Machine is as good as new. The High Quality Press Brake (HQPB) is the top model among Placke press brakes. The entire manufacturing process, from the hydraulic cylinder to electrical cabinet construction, is carried out in-house. By combining state-of-the-art technology with decades of experience in forming technology, the HQPB series allows you to perform bending at the highest level. The standard configuration already provides a fully functional press brake. With this package of safety, reliability, and efficiency—paired with user-friendly operation—we are able to meet the highest demands and precision requirements in the bending process. Machine Frame: - Base machine constructed from steel S 355 N - Side frames welded with 2 pressure pipes and top-mounted oil tank - Above-floor design - Coating (2-component textured paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relieved annealed - Depth penetration measurement, reader head guided by ball roller guide - Separate Y1 and Y2 control, electrical angular misalignment monitoring Hydraulic System: - Hydraulic proportional control valve system with electronically monitored cylinder parallelism - Solid steel cylinder with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, type NSCL-II-HC, fully hardened, max load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping bar, dimensions: 95 mm high, 95 mm wide - Centrally adjustable crowning system, WILA system, CNC controlled, NSCR-I-MC. Two mechanically adjustable wedge bars compensate for deflection - Single-V die holder (13x20) - Working height: 1050 mm (with 55 mm tool height) Front Side of the Machine: 2 aluminum support arms in the front, approx. 600 mm long, incl. 2 tilting stops, measuring tape, and plastic wear strip. The support arms are movable on a linear ball guide and can be height adjusted for 55 mm to 100 mm high dies using a slotted hole. The linear ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique Itsdpfx Aew Nhhgsa Esr - Backgauge with AC servo technology - Pilz safety PLC Backgauge "2-axis controlled": - X- and R-axes CNC controlled - Z-axis manual Delem DA 66 Touch control on swivel arm incl. Profile S-Lite offline programming software. Safety equipment according to CE standards Technical Data and Working Range: Press force: 1250 kN Working length: 3100 mm Clearance between uprights: 2600 mm Installation height: 450 mm Throat depth: 305 mm Ram stroke: 265 mm Ram Speeds: Rapid traverse max: 220 mm/s Pressing speed max: 9.8 mm/s Return speed max: 160 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electrically limited to ± 5 mm Lower beam height above floor: 900 mm Motor power: 11 kW Main Dimensions: Pit depth: 0 mm Side frame pit depth: 0 mm Machine weight: approx. 9.5 t Tank capacity (hydraulic oil): 290 l (Technical changes reserved) Lighting behind the machine: Workspace illumination using LED light strip between the uprights.

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing Itjdpfx Aaour Alde Eor -matching key bar chuck: ID12273 -Dimensions total: 90/70/H68 mm -Total weight: 2.1 kg

Condition: used, Universal clamping pad set in a wooden box Itjdpjb A Rgpofx Aa Ejr -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamp No. 372000. -Support height 22 to 208 mm. -Material: Painted heat-treatable steel -Scope of delivery: No. 372200 4 pairs size. 1 4 pairs size 2 2 pairs size 3 including wooden box -Weight: 8 kg