Four-jaw chuck

unbekannt -

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible Djdpfx Asu Ngx Dsfnokh *

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Dedped Hmnfsfx Afnokh Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Condition: used, plate thickness 4 mm Cutting thickness max. At (60 kg / mm²) 3 mm blade length 90 mm weight ca. 30 kg Dodpsu I Et Refx Afnjkh dimensions of the machine ca. 0,45 x 0,30 x 0,2 m Notching unit for installation under a hydraulic or eccentric press. The cutting thicknesses are estimated to be low. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), table length 800 mm table width 320 mm Dksdpfxsumndbo Afnoh groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m².

Condition: new, 4-jaw Chuck unused Diameter 400 mm Recording KK 8 (140 mm) Opening 125 mm JAWS Height 140 mm Dedpod Idnwjfx Afnjkh Weight 62 kg

Condition: used, Jaw width: 155 mm jaw height: 55 mm Dsdpfx Aec R Slqsfnjkh Clamping length (without special jaws): 170 mm Vertical swivel angle: + 90/- 15°. Height horizontal: 200 mm Required space: 650 x 380 mm

Condition: used, Jaw width: 130 mm Jaw height: 43 mm Clamping length: 100 mm Overall height: 175 mm Dkjdpfx Asb Eg Rhjfnjh Vertical swivel angle: + 15/- 45

Condition: used, Chuck outer Ø: 350 mm Bore: 125 mm Height: 100 mm incl. outward stepped jaws, chuck key, Dkedpfedaqcfjx Afnsh inward stepped jaws are missing!

Condition: used, gr. working width: 1020 mm for sheets (steel sheet) up to: 1 mm Djdpfeb Hlyrsx Afnjkh space requirement: 1420 x 650 x 1160 mm Weight: 250 kg

Condition: used, 3 ball bearing castors, width: 320 mm Height of castors above floor: 970 mm Dkjdjctb Dgjpfx Afnsh Total length: 1200 mm Roller block: Roll width: 400 mm Roller height above floor (adjustable): 970 mm

Condition: used, Outer-Ø: 355 mm Bore: 130 mm Height without flange: 113 mm Height with flange: 150 mm Dkodpfec Snucox Afneh

Condition: used, Load capacity approx.: 4 t Dodec H Tmtepfx Afnjkh Platform size: 1500 x 3000 mm Platform height: 600 mm Weight approx.: 600 kg

Condition: used, Jaw width: 150 mm jaw height: 45 mm clamping length: 130 mm overall height: 185 mm Vertical swivelling: + 20/- 45°. Dkodpjb Eg Rcofx Afnsh

Condition: used, gr. working width: 1040 mm Folding width approx.: 12 mm for sheet thickness up to approx.: 1 mm Drive motor, gear brake motor: 380 V, 0,55 kW space requirement: 1300 x 480 x 960 mm Dodpfjcaxtxjx Afnskh Weight: 334 kg