Drill quill spare part

unbekannt Ø 62 x 267 mm

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Dkjdjxiymtopfx Afneh Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 3500 mm Dkjdpfev Hx R Nox Afneh weight approx. 22 tons

Condition: used, Turning Length 1000 mm Swing over bed Ø500 mm Swing over cross slide Ø270 mm Swing in the gap Ø700 mm Gap length 230 mm Spindle bore 52 mm Spindle taper 5 Mt Speeds ranges 2750 Rpm Dkedpfowtp Abex Afneh 2 axis DRO Coolant 4 tool holders 3 jaw chuck

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm Dksdperwmbgofx Afneh - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Dksdotwpyyepfx Afneh

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW Djdpfx Afeuzvzxenskh - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg Dksdpfxswiipme Afnoh

Condition: used, Year of construction: 1983, turning speed range 40 - 3.600 U/min bore stroke 105 mm tool adaptor MK throat 250 mm transmission ratio 2x table surface area 660 x 320 mm T-slots 3x T-slot - distance 100 mm T-slot - width 18 mm total power requirement 2 kVA weight of the machine ca. 720 kg Dksdpfxoxgu I He Afnoh dimensions of the machine ca. 1,2 x 1,0 x 1,8 m Pillar Drilling Machine ACIERA - 22 S 2-1 E - Only 523 operating hours

Condition: excellent (used), Machine number: 7455 TyP / Model: BT 2 Drilling capacity: up to 16 mm spindle mounting: drill chuck speed range: 355 / 710 / 1.400 / 2.800 rpm Dkedpfx Ajlk Dkuefnjh stroke: 100 mm throat: 210 mm table: 340 x 470 mm head adjustment: 120 mm Total power: 1,1 kW accessories/equipment: drill chuck Condition: very good weight: 165 kg Dimensions: 480 x 550 x 1.150 mm

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm Dkodpfx Afsva Higjnjh threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *