Planar bending machine

unbekannt Ø 1330 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Kjdpfx Aaeu Nmppo Ejfa

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after Kjdpfx Aaefg E Hpo Eefa a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG Ksdjkzk Exepfx Aa Eofa - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 Kodpfxoiix Uvo Aa Eofa profiling and milling machine UNIVAR 10, year 1997

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Kfjdskvnumjpfx Aa Eea Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Kfjdpfofw Ah Rsx Aa Eja Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material Kodpfxofg E Hlo Aa Ejfa 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Down table size: 1120x1250mm Technical characteristics: *UP DOWN STROKE 1000 mms *FORWARD BACKWARD STROKE 1200 mms Kfodpfx Ao Dv Nxea Eja *LEFT RIGHT STROKE 1000 mms

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Kfodpfxjm Twnlo Aa Esa Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Year of construction: 1979, condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Kfedponqy Hajfx Aa Eea Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.