Horizontal bending machine

Tubend HP 40

Condition: new, Year of construction: 2024, overall weight: 1,140 kg, tool height: 200 mm, operating speed: 10 mm/s, total length: 1,300 mm, total height: 1,300 mm, total width: 600 mm, reverse speed: 10 mm/s, working height: 935 mm, table width: 600 mm, table length: 1,200 mm, stroke length: 290 mm, pressing force: 40 t, Equipment: emergency stop, STANDARD ACCESSORIES Ergonomic Tool Clamping Table Hydraulic Speed and Pressure Adjustment Easily Adjustable Back Gauge Induction Hardened Support Pins NC Control Easy Tool Change MODEL HP 40 Max Pressure At 200 Bars ton 40 Bending Capacity Flat Material mm 250×16 Max Stroke mm 300 Height Of Toolings mm 250 Working Speed mm/sec 10 Kfedpfx Aot H Sxcja Eoa Motor Power kw 4 Net Weight kg 1190

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel Kfodpfx Aajfg Eu Uj Eja • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: new, pressing force: 40 t, - Capacity 40 tons - Bending capacity 250 x 16 mm - stroke 290 mm - NC touch screen control - Foot control Kfsdpfxsu Smq Ej Aa Eoa - Emergency stop - 400V

Condition: new, Year of construction: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Kjdohgihkjpfx Aa Ejfa Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel. -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Kfsdpfxjhq A T Us Aa Eoa Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t Kfedpfecblc Ssx Aa Eoa

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm Kjdpodzp Tcsfx Aa Esfa table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: new, functionality: fully functional, Year of construction: 2024, Folding length 3020 mm Press force 320 t Infeed speed 140 mm/s Bending speed max. 10 mm/s Retraction speed 130 mm/s Y-axis stroke 400 mm Kfsdsuf Nr Aspfx Aa Eja Installation height 650 mm throat depth 450 mm free column passage 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm total height 3100 mm Height of machine table 920 mm Motor power 22 kW Oil tank 300 l Machine weight 14450 kg (Data may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Double-guided press beam, stable and precise Stable back gauge, double-guided Stop fingers double-guided on linear guide Sliding front arms with height adjustment Side and rear protective covers Lower die adapter rail 60 mm Man. Top tool clamping system (Promecam system) Foot switch with emergency stop switch 380 V, 50-60 Hz, 3 phases LED lighting Additional equipment: CNC control Delem DA 66t R-axis backgauge CNC controlled CNC controlled crowning Fiessler Akas 2M laser safety device 2 additional stop fingers (4 in total) 1 set of upper and lower tools - Further machining lengths and thicknesses are available with corresponding accessories! -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. Kfjdpfxemhfrre Aa Eea geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: new, Year of construction: 2025, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 Liter Maximum workpiece height: 200 mm Strip capacity: 200x12 mm Pipe capacity: 48x4.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. Ksdpfjhgib Nex Aa Eefa - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.