CNC Press Brake

Trumpf TrumaBend V170

Condition: good (used), functionality: fully functional, Year of construction: 1999, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V170 Year: 1999 Technical Data Manufacturer: TRUMPF Model: TrumaBend V170 Year of manufacture: 1999 Operating hours: 45,074 h (read-off) Press force: 170 t Usable length: 4000 mm Stroke: 215 mm Dimensions: L 4.6 x W 2.70 (without bending aids 2.20 m) x H 2.70 m (transport height 2.5 m) Weight: approx. 16.5 t Equipment • Delem DA 2D graphic CNC controller • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Pneumatic die shifting • Hydraulic tool clamping top and bottom (Wila/Trumpf system) • CNC-controlled crowning • 2 movable bending aids • Prepared for ACB angle measurement • Upper tool, OW210/S 28°/R1, H 140mm, L = 4000mm, segmented • Lower tool, EV002W8 30°/R1, H 100mm, L = 4000mm, segmented All details without guarantee. Ljdpfx Aaox E Tpie Eehr A demonstration can be arranged at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Biegemaster, working width: 6,400 mm, Equipment: documentation/manual, emergency stop, For sale: Biegemaster XBEND 6.1,5 Bending length: 6400 mm Insertion depth: 1250 mm Reason for sale: acquisition of a new machine Year of manufacture: 2015 Lodpfx Aaswxmdyo Eshr The machine was operated in single-shift operation always by the same 3 operators Regular maintenance performed Slight signs of use visible Machine can be picked up approximately 7 months after the date of purchase

Year of construction: 1997, operating hours: 47,122 h, condition: ready for operation (used), Control Unit Model DA-65 Brand DELEM Additional Equipment Hydraulic clamping system Ledjx D Ec Ajpfx Aa Ejhr This 6-axis TRUMPF Trumabend V170 press brake was manufactured in 1997. It features a bending force of 1700 kN and a maximum bending length of 4060 mm. The distance between uprights is 3680 mm, and it includes a hydraulic clamping system. Consider the opportunity to buy this TRUMPF Trumabend V170 press brake. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic Lhedpfx Aaexcp Rbs Eer - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Year of construction: 2002, condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header Lhodoh Tkraspfx Aa Ejr MULTIPRESS MP610LS Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Max. KO length (die side): 80 mm Max. PKO length: 23 mm Max. Speed: 180 ppm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: Ljdpju T Nknofx Aa Ejhr - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, General Data Measurements width 2210 mm Measurements depth 5000 mm Measurements height 3100 mm Machine weight 18000 kg Control Unit Brand TRUMPF Main Drive Pressing force 1700 kN Bending length 4080 mm Stroke 365 mm Number of axis 8 This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Application Types Bending Lodex D Ilyopfx Aa Ejhr

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg Lodpfswc D Dxox Aa Eehr 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark

Condition: used, Year of construction: 2000, CNC press brake Manufacturer: Trumpf Model: Truma Bend V170 Year of manufacture: 2000 CNC control: Delem Ledpfxox Di Hxo Aa Eehr Press force: 170 t Working width: 4 m Crowning Backgauge 6 axes Hydraulic tool clamping Height: 2.9 m Without tools 161225

Condition: good (used), Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing attachment, dividing head, rotary indexing table rotary coupling -Manufacturer: Fibro, Fibroplan rotary table with drive -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 m -Clamping: hydraulic -Drive: Indramat servo motor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 2x round table available (1 x with base plate) -Price per piece Ledjhvtcbopfx Aa Eohr -Dimensions: 660/640/H550 mm (with base) -Weight: 420 kg (with base plate) /pc.