Press brake

TRUMPF TrumaBend S400

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip Gedpfx Asu Utaismujub - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Control: DA 69 TW Guedpfxeyz S Ngj Amuob Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, LVD PPEB 400 - 61 press brake, year of manufacture 2015, LVD CNC control, working length 6100 mm, press force 4000 kN, distance between uprights 5050 mm, stroke 300 mm, distance table - ram 570 mm, throat depth 400 mm, table width 200 mm, max. table load 2500 kN/m, closing speed 100 mm/sec, working speed 11 mm/sec, return speed 120 mm/sec, machine weight 37,000 kg. Gedpfjyma Sfjx Amueub

Condition: good (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, stroke length: 445 mm, throat depth: 420 mm, travel distance X-axis: 860 mm, controller model: TASC 6000, working width: 4,420 mm, bending force (max.): 320 t, distance between stands: 3,680 mm, installation height: 615 mm, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 6, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, angle measuring system, documentation/manual, foot remote control, safety light barrier, TruBend Cell 5000 – Robotic Bending Cell 320t Complete Service History - 6-axis backgauge system with control cabinet air conditioning - Sensors for 6-axis backgauge - Hydraulic upper tool clamping - CNC crowning - Preparation for ACB - MobileControl - Rear work area lighting - Front work area lighting - Operator comfort package with screen, mouse, and keyboard - BendGuard - BendMaster 150 - Track extension 16,000 mm Guedsylankspfx Amujb - NC grip re-orientation station - Double sheet detection - Right-hand side door for safety fence - Vacuum gripper - 3x pneumatic gripper couplings - Robust machine frame in full-steel construction, ram stress-relieved annealed - 4-cylinder upper drive - Block hydraulic system with low-noise double pump - Backgauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Machine control network connection Control - TRUMPF TASC 6000 Safety - Standard safety equipment

Year of construction: 2023, condition: new, Rotating device for a component load of 40.000kg. Applicable component diameter: 500mm-6.000mm. Rotating speed 100-2.000mm/min. Gsdpfoflmcxjx Amuoub Control via hand remote control (radio control on request).

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Corner Crimping Press Elumatec, Type: EP 124, Year: 2013 Pressing height: 140 mm Pressing force: 70 kN (7 t) Drive: pneumatic With support arms and pressing knives Electrical connection: 230 V 50/60 Hz Gjdpfxoyyq Ekj Amujub Compressed air connection: 7 bar Air consumption: 35 l per working cycle Dimensions (L x W x H): 1100 x 950 x 1230 mm Weight: 545 kg (Subject to changes and errors in technical data as well as prior sale.)

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Press Characteristics open back design fixed table crankshaft mounted transversely friction clutch rigid and durable machine construction horizontally mounted crankshaft dry pneumatic clutch lifting balance device safety valves manual control Technical Specifications Press force: 25 t Stroke under nominal load: 3 mm Slide stroke: 10 – 110 mm Number of strokes: 80 – 120 strokes/min Max. die set height: 250 mm Die height adjustment: 50 mm Throat depth: 210 mm Distance between frame columns: 450 mm Working table width: 700 mm Working table length: 400 mm Working table thickness: 80 mm Table hole diameter (outer): Ø170 mm Table hole depth: 20 mm Table hole diameter (inner): Ø150 mm Slide bottom surface width: 360 mm Slide bottom surface length: 300 mm Punch hole diameter: Ø40 mm Punch hole depth: 60 mm Motor power: 3 kW Overall dimensions (W × L × H): 1460 × 950 × 2380 mm Weight: 3100 kg Equipment light curtains mechanical guards ejector in the lower table Delivery Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. Additional Information Gedsytcvgspfx Amusub If you are interested in other machines, we encourage you to visit our website.

Condition: new, sheet width 1350 mm 3 mm sheet thickness for stainless steel 1,5 mm rear stop 600 mm total power requirement 3 kW weight of the machine ca. 1150 kg dimensions 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system Gjdoyv Nt Sepfx Amujub - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,850 mm, total height: 2,680 mm, total width: 1,650 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, Machine Description The SPB 110T x 3200 (HACO60) press brake is a modern CNC machine designed for precise sheet metal bending in both single-piece and serial production. It features an advanced electro-hydraulic servo system ensuring high accuracy, stability, and repeatability. Equipped with CNC control and synchronization based on linear encoders, the machine guarantees precise ram positioning and uniform bending over the entire working length. The automatic crowning system compensates for table deflection depending on applied force, ensuring consistent bending angles even with large workpieces. Its robust construction, fast tool clamping system, and precise back gauge provide high productivity, ergonomics, and reliability in industrial applications. Technical Specifications Basic parameters: Press force: 1100 kN (110 T) Gjdsy D Nvispfx Amusub Working length: 3200 mm Distance between columns: 2700 mm Throat depth: 400 mm Stroke: 200 mm Max opening height: 480 mm Speeds: Rapid approach: 180 mm/s Working speed: 13 mm/s Return speed: 170 mm/s Drive & control: Motor power: 8.5 kW CNC system: HACO 60 (USA) Number of axes: 4 + 1 auxiliary axis Accuracy: Ram repeatability: ±0.01 mm Ram positioning accuracy: ±0.02 mm Back gauge repeatability: ±0.02 mm Bending straightness: 0.3 mm / 1 m Bending angle deviation: ±1–1.5° (up to 4 m) Encoder resolution: 0.005 mm Dimensions: Machine dimensions: 3850 × 1650 × 2680 mm Main Features Electro-hydraulic servo system CNC-controlled crowning system Linear encoders on both sides Precision back gauge with linear guides Ball screw driven by servo motor Quick tool clamping system Adjustable front sheet supports

Condition: excellent (used), functionality: fully functional, Workshop + press brake Grattieri (Italy) 100 t. CE Year of manufacture 1995, very little used, almost like new with multi-prism tool Working width 1.5 m Stroke 400 mm Gjdpfx Amjyv In Ujuoub Rear and side safety guards can be removed for longer parts, as well as the worktable and bending prism Of course, power-on inspection possible Free loaded from D-88433 Schemmerhofen