TRUMPF TruBend Cell 5000

TRUMPF TruBend Cell 5000

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press Dedpfx Afjb A Tcfsnscc - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system Djdpjxayl Defx Afnscc - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We are offering a TRUMPF TCF1 generator and resonator. These components come from a portal 3D laser. The system was fully functional until it was dismantled 24 months ago. Since then, the components have been stored in a heated area. Dcodpfx Afov Ic Saenec

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 5000 kg Measurements height 2747 mm Measurements depth 2439 mm Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Control Unit Brand HURCO Model WINMAX 5 GEN Movement X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dedpsx D Dk Ssfx Afnocc Dimensions Machine Length 2180 mm Table Table Width 1020 mm Table Length 510 mm Table load 1350 kg This 3-axis Hurco VMX 30i was manufactured in 2018 and features a robust vertical machining center design. It boasts a spindle speed of 12000 rpm, a spindle motor power of 13.5 kW, and a tool changer with 30 pcs capacity. The machine dimensions include X=760 mm, Y=510 mm, and Z=610 mm, with a table size of 1020x510 mm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, working width: 1,030 mm, stroke length: 200 mm, overall weight: 4,000 kg, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40 Year of Manufacture: 2017 Dcsdpfx Ajyficdofnjc Technical Specifications Manufacturer: BYSTRONIC Operating hours: approx. 9,500 h Model: Xpert 40 Year: 2017 Press capacity: 40 t Bending length: 1,030 mm Stroke: 200 mm Distance between frames: 1,060 mm Motor power: 7.5 kW Weight: 4 t Dimensions: L 1.52 x W 1.60 x H 2.45 m Equipment • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A tool holder, top • Height-adjustable ByVision Bending display with 22-inch Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC Interface Bending • Bend curve generator • Automatic tooling overload protection • Oil cooler • Ergo foot switch • Rear sliding door with electrical monitoring All details without obligation. A powered demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2020, 6-ton demolition ball Manufacturer: Rockworks Dsdpfowa Nv Isx Afnscc Year of manufacture: 2020 Diameter: approx. 1,100 mm

Condition: good (used), Year of construction: 2004, Used CNC punching machine from Finn Power Type: C5 Travel range X: 2580 mm Travel range Y: 1270 mm Punching force: 30 tons Dcjdpoxphwyefx Afnec Including tools

Condition: like new (used), Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of production: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8 AXESL configuration) Press force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending angle measurement: digital angle sensor Stroke: 'Long Stroke' (extended) Connected load: 20 kW Operating hours: 10,238 h Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Dedpfx Ajx Trw Ijfnjcc Additional equipment: Very large number of tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 7,724 h, machine/vehicle number: 19500015 + 508267, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Bystronic, controller model: ByVision, bending force (max.): 40 t, working width: 1,030 mm, stroke length: 200 mm, distance between stands: 1,060 mm, installation height: 515 mm, operating speed: 1,500 mm/s, oil tank capacity: 100 l, travel distance X-axis: 300 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, overall weight: 4,000 kg, total length: 3,250 mm, total width: 2,800 mm, total height: 2,500 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, Equipment: emergency stop, finger protection, foot remote control, safety light barrier, For sale is an automated press brake with integrated robotic system from first owner, designed for serial sheet metal forming. Press Brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Technical Data Press Brake - Press force: 400 kN (40 t) - Working length: 1030 mm - Control system: ByVision Robot - Max. rated payload: 11 kg - Reach: 1100 mm - Axes: 6-axis - Repeatability: 0.02 mm - CE-certified safety modules Features - Fully automated bending cell with integrated 6-axis industrial robot - Single ownership - Installation dimensions (LxWxH): approx. 3.25 m x 2.8 m x 2.5 m - ByVision Bending operator terminal with 22" Full HD touchscreen Machine Condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically in perfect condition - Functional test: can be demonstrated during inspection - Location: Niederrohrdorf, Switzerland Terms - New price: CHF 250,000 (2019) - Selling price: CHF 150,000 (negotiable) - Dismantling, collection, transport: by buyer Dsdpfx Asx El Nhofnocc - Availability: immediate / by arrangement - Payment: advance payment / bank transfer - Warranty: The system is sold as seen and inspected, with exclusion of any liability for material defects. No warranty or guarantee provided. Seller accepts no further liability.

Condition: repair required (used), Year of construction: 2000, operating hours: 10 h, functionality: not functional, Place: Austria Dcjdpfxoxy I I Ts Afnoc Available immediately