Tensile testing machine
Tinius Olsen H25KT Zugprüfmaschine

Name: Tinius Olsen H25KT Zugprüfmaschine
Brand: Tinius Olsen
Availability: InStock

Year of construction

2014

Condition

Used

Location

Sonsbeck

Tensile testing machine Tinius Olsen H25KT Zugprüfmaschine

Show map

Machine data

Machine type:: Tensile testing machine

Manufacturer:: Tinius Olsen

Model:: H25KT Zugprüfmaschine

Year of construction:: 2014

Condition:: reconditioned (used)

Operating hours:: 50 h

Price & Location

Location:: Gildestrasse 5, 47665 Sonsbeck, Deutschland

Call

Technical details

Tractive force with load:: 25,000 N

Details about the offer

Listing ID:: A19625216

Update:: 22.07.2025

Description

Universal Testing Machine, Model H25KT

For tensile, compression, flexural, shear testing, etc., in accordance with EN ISO 7500-1 and ASTM E4 standards.

The H25kS is a universal testing machine developed according to the latest standards. The machine operates in compliance with EU radiation protection and safety regulations (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage inside the machine is 48 volts.

Key Features
• Large, easy-to-read liquid crystal display with backlighting
• Graphical or numerical display mode
• Alphanumeric file entry
• Speed range from 0.001 to 1000 mm/min
• High return speed 0.001 to 1000 mm/min
• Precise crosshead positioning
• Robust load frame
• Result output protocol with mean and standard deviation via printer
• Wide selection of Windows-based test software for various international standards
• RS232 interface mode for PC connectivity
• Force measurement accuracy 0.5% across the entire range
• Position measurement accuracy 0.001 mm
• Equipped with force and displacement alarm system
• 32-bit motor controller
• 20% digital weight compensation during load cell capacity verification
• Automatic motor alarm for over/undervoltage and overheating

Specifications:
• Force measurement accuracy: ±0.5% of indicated load within 2% to 100% range
• Positioning accuracy: ±0.01% or 0.001 mm
• Speed accuracy: ±0.005% of selected speed
• Operating temperature: 0 to 38°C
• Humidity range: 10% to 90%

Technical Data:
• Dual-spindle bench-top model
• Maximum load: 25 kN in tension and compression
• Maximum travel: 1100 mm without grips
• For further details, please refer to the brochure

Dimensions:
Height: 1600 mm
Width: 650 mm
Depth: 450 mm
Weight: 120 kg
Power Supply:
Gbodpfxow A Skas Afneh
Machine: 50-60 Hz, 2000 W
Power supply: 220/240 VAC

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2022

20 listings online

Call

Send inquiry

Telephone & Fax

+49 2838 ... show

Fax:

These listings may also fit your interest.

Listing

Germany

1,293 km

Robot
StäubliRX170

Call

Listing

Universal machining center DMG MORI DMU 80P duoblock

Auw bei Prüm

1,059 km

Universal machining center
DMG MORIDMU 80P duoblock

Call

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Gbodpfx Aew Ht Ibsfneh Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

See details

Listing

Milling machines Deckel MAHO DMU 125 P 1997 Deckel MAHO DMU 125 P

Wijchen

961 km

Milling machines Deckel MAHO DMU 125 P 1997
Deckel MAHODMU 125 P

Call

Year of construction: 1997, condition: used, Price: On request - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - Table length [mm]: 5000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout - └ Type of digital readout: Heidenhain Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Godpfxewh Shvs Afnjbh Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

See details

Listing

Automatic band saw 430 x 430 mm KASTO KASTOtec A4

Babberich

984 km

Automatic band saw 430 x 430 mm
KASTOKASTOtec A4

Call

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm Gbjdpfxju R R Avj Afnoh weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

See details

Listing

Tank turning turning device Heinrichsglück RA15.000PUR

Soest

1,126 km

Tank turning turning device
HeinrichsglückRA15.000PUR

Call

Listing

Conveyor system LORENZ + ARKU BRM 50/620.9 + AH 3000/ST-M

Neunkirchen am Brand

1,405 km

Conveyor system
LORENZ + ARKUBRM 50/620.9 + AH 3000/ST-M

Call

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Gedpfx Afohigmbensbh Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

See details

Listing

Hattingen

1,069 km

Vertical Turning Machine
EMAGVL2

Call

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min Gsdpfx Aoqvd Iqofnebh travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

See details

Listing

Mierlo

965 km

Tube bender
Herber150RL

Call

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control Gbedpfxjga T Exe Afnoh * Bed length extension

See details

Listing

Vertical Turret Lathe - Single Column DÖRRIES VCE 2000/180 MC

Germany

1,100 km

Vertical Turret Lathe - Single Column
DÖRRIESVCE 2000/180 MC

Call

Condition: used, Year of construction: 1998, swing diameter 2000 mm table diameter 1800 mm turning height 1500 mm Control Siemens Sinumerik 840 C table turning speeds 0-280 U/min feed range 0-18000 mm/min workpiece weight max. 12000 kg total power requirement 177 kVA Feed drives: - Crossbeam support, vertical and horizontal mm/min - Crossbeam support, rapid traverse 18000 mm/min - Crossbeam adjustment speed 425 mm/min Milling drive: - Milling drive power 30 kW - Number of gear stages 2 stages - Stage jump 3.17 - Speed range of the 1st gear stage 10 - 224 - 950 rpm - Speed range of the 2nd gear stage 32 - 72 - rpm Tool system, cutting force: - Tool system 250.2 - Milling spindle holder according to 69871-A SK 50 - Cutting force on turning tool 50 kN Equipment/accessories: - Tool measuring probe - Various turning tool holders - Various clamping jaws - Various clamping devices - Various SK 50 mountings - Grinding spindle Gbedpfx Aexap Eyjfnsh - Powered tools - Tool changer/head changer - Hydraulic unit - Chip conveyor - Technical documentation

See details

Listing

5-axis CNC machining center DMG MORI DMU 60 P 60 WKZ Wechsler

Burgoberbach

1,385 km

5-axis CNC machining center
DMG MORIDMU 60 P 60 WKZ Wechsler

€15,000

fixed price plus VAT

Call

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P Gbedpfx Afjwbhq Hsnsh The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

See details

Advertise here