CNC cylindrical grinder

STUDER S 41

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Tedpfx Acey H Dahs Tsb Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces Tedpfeyiz R Uex Ac Tob • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] Todpsx Av Adjfx Ac Tjb - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For a description, please refer to the attached data sheet. Tjdpfx Aozqcvysc Teb

Condition: used, Year of construction: 2018, Suitable for regrinding and production of wood and metalworking tools of all kinds. Accessories: Total enclosure Fanuc robot loader with 6 controlled axes and camera system Software Toolstudio Standard & Advanced Version 3 Software Helitronic Toolstudio Option Step Tools/Drills Automatic fire extinguishing system Drive chiller for all drives Measuring probe Oil drip tray Glass scales on the linear axes Tsdpfozdc Rlsx Ac Teb Electrostatic mist collector Pneumatic workpiece clamping Automatic, hydraulically actuated steady rest Measuring mandrel ISO 50 3 grinding wheel adaptors Longitudinal movement (X-axis): 400 mm autom. X‘-axis for moving the workpiece carrier: 110 mm Vertical movement (Y-axis): 320 mm Transverse movement (Z-axis): 320 mm Rotary table swivel range (C-axis): - 110 ° - + / 160 ° Swivel range B-axis (grinding head): +/- 20 ° Workpiece carrier (A-axis): ISO 40 Speed ​​range: 0-1000 rpm Workpiece diameter in production: 0.1 - 12.7 mm Workpiece diameter in resharpening mode: 2 - 12.7 mm Max. Workpiece length: 120 mm Cutting length: 70 mm Drive power grinding spindle 1:: 5 kW Drive power grinding spindle 2:: 1,5 kW Drive power grinding spindle 3:: 1,5 kW Grinding spindle speed stepless: 0-10,000 rpm. Connected load: 18 kW (400 V / 50 Hz) mass: about 6000 kg Dimensions W x D x H =: 2385 x 2200 x 2006 mm colour: colour white RAL 9003 / iron grey RAL 7011

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,679 h, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of Manufacture 2018 / Commissioned 2019) You are welcome to inspect the machine in our factory while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK VTC-820/30 is a powerful CNC vertical machining center for the precise and efficient machining of large workpieces. With generous travels of 3,000 mm in the X-axis, 820 mm in the Y-axis, and 720 mm in the Z-axis, the machine is particularly suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The sturdy work table, with dimensions of approximately 3,500 × 820 mm, allows for the accommodation of large workpieces. The powerful main spindle, with speeds of up to 12,000 rpm and a drive power of approximately 22 kW, ensures high cutting performance and precision. The CAT 40 (ISO 40) spindle mount ensures broad tool compatibility. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, rapid programming, and high process reliability. The 48-tool changer enables flexible and efficient machining processes, even for complex manufacturing tasks. For optimal production conditions, the machining center features coolant supply through the spindle, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that guarantees high precision, performance, and reliability in industrial manufacturing. Tsdpfx Ajy S Db Aec Tjb You can rely on us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Tsdjyyxlfepfx Ac Teb Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, Tjdezk H Hvopfx Ac Tsb -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Tedpfxovt A Rte Ac Tsb Turret head B-axis with 1° division Belt filter system included

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Tedpfx Ajzqzm Dsc Tjb Type: PUMA 480 LM Year of manufacture: 2007 Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Automatic tool measuring arm.