Internal Grinding Machine
STUDER-Combitec CT960F

Name: STUDER-Combitec CT960F
Brand: STUDER-Combitec
Availability: InStock

Year of construction

2008

Condition

Used

Location

Kirchheim unter Teck Germany

Internal Grinding Machine STUDER-Combitec CT960F

Show map

Machine data

Machine type:: Internal Grinding Machine

Manufacturer:: STUDER-Combitec

Model:: CT960F

Year of construction:: 2008

Condition:: used

Price & Location

Location:: 73230 Kirchheim-BEMA

Call

Details about the offer

Listing ID:: A20696665

Reference number:: 1056-8373

Update:: 13.12.2025

Description

internal diameter 99999 mm
grinding depth 99999 mm
swing diameter 99999 mm
Control FANUC 320iA
3 x internal grinding spindles
2x HV-X 100-90000/3
Housing diameter: 100 h5 mm
Spindle speed max: 90000 min/1
Nominal/max. power: 2.5/3.0 kW
Spindle nose: D10/18
Spindle cooling: Water

1x HS80c 120000/1.1
Housing diameter: 80 h5 mm
Spindle speed max: 120000 min/1
Nominal/max. power: 0.8/1.1 kW
Spindle nose D06/12
Spindle cooling: Water

Gkjdsx Dxw Hopfx Aayjf
1 x external grinding spindle:
MMO-100 HSK-C50/4
Diameter: 100 h5 mm
Maximum speed: 3770 min/1
Nominal/max. power: PS1/PS6 - 6.0/7.0 kW
Clamping system: HSK-50/M12
Grinding wheels: Diameter 125-200 x 2-20 mm

1 x dressing spindle
MHF-72 D40/16
Housing diameter: 72 h6 mm
Maximum speed range: 16000 rpm
Power S1/S6: 400/500 W
Spindle nose: 40 mm/8xM5 on TK 56 mm
Spindle nose: 40 mm/4xM5 on TK 32 mm
1 x measuring probe (longitudinal positioning)
Etamic C25

Abrichteinheit für das automatische Abrichten mit Hydraulisch einschwenkbarem Arm.
Präzisions Positionierung und Einrastung mittels Konischem Bolzen, geschliffen und gehärtet.
Schwenkbewegung : Hydraulisch
Schwenkgeschwindigkeit : Einstellbar

1 x Messtaster (Längspositionierung)
Etamic C25

X-Achse Fahrweg: 400 mm
Auflösung: 0.0001 mm
Vorschub: 0-10'000 mm/min
Messung: Glasmassstab Absolut

Z-Achse Fahrweg: 400 mm
Auflösung: 0.0001 mm
Vorschub: 0-10'000 mm/min
Messung: Glasmassstab Absolut

B-Achse Fahrweg: +60°..- 91°
Auflösung Winkelmessgeber: 0.0005°
Auflösung Antrieb: 0.0001°
Vorschub: 25°/Sek
Messung: Winkelmessgeber Absolut

Revolver Anzahl Position 4
Zeit beim Wechseln 5 Sek
Möglicher Spindeldurchmesser: 0 100 mm

Werkstück- Spindeldrehzahl max.: 1'000 min-1
Spindelstock Leistung max.: 1.8 kW
960-41 Spindelnase: A2.4/MK5

Ausrüstung Anschnitterkennung

Anschnitterkennung und Prozessoptimierung
zur Optimierung des Schleif- und Abrichtprozesses und zur Verkürzung des Luftschleifens.
Signal über Körperschallsensor auf dem Werkstückspindelstock aufgebaut, bestehend aus:
-1x AE-Auswertsystem mit Display AE4100
-1x Kabel
-1x Software und Anbauaufwand inkl. Material

Sensor und Empfänger für Abrichtspindel
- 1x Ringsensor
- 1x Ringempfänger

Sensor und Empfänger für Spindelnase A2.4/MK5

Elektroschrank mit CNC-Steuerung FANUC 320i A
und Bedienungskonsole mit Bildschirm 15" Color LCD TFT 1024 x 768 Bedienpanel 55 Tasten und LEDs
PC Tastatur QWERTY Intel Pentium III 866 MHz Windows XP Professionnal
Combitec HMI für FANUC 320i A
Standard Programmiersprache nach DIN/ISO Werkstattorientierte Schleifzyklen (WOP)
Mobiles Handrad mit Wahlschalter 0.001, 0.01, 0.1 mm und Achsenwahlschalter
Vorschub Korrektur über Raster-Potentiometer 0-100 % Spindelgeschwindigkeits-Korrektur über Raster-Potentiometer 50-125 % RJ-45 Ethernet mit TCP/IP

Software und Zubehör für das Radius und Konus schleifen mit PC Simulation und CNC-Bahnkontur schleifen

Vollautomatisches Schleifen eines Radius G71 und/oder eines Konus G72 ab einem bestimmten Winkel auf einen...

Seller

Registered since: 2002

52 listings online

Call

Send inquiry

Telephone & Fax

+49 7021 ... show

Fax:

These listings may also fit your interest.

Listing

Lead/traction spindle lathe Böhringer DUE 560

Oberlangen

1,035 km

Lead/traction spindle lathe
BöhringerDUE 560

Call

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Gkjdstud S Ujpfx Aayef Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Travel Face slide travel 345 mm Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons

See details

Listing

Rotary table surface grinding machine ELB-SCHLIFF SWR 50 T

Haiger

1,157 km

Rotary table surface grinding machine
ELB-SCHLIFFSWR 50 T

Call

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Gjdeu Ed Nlepfx Aayokf Model: SWR 50 T Completely overhauled: 2008 Delivery time: immediate Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Total weight: approx. 5000 kg Control system: Siemens PLC

See details

Listing

Cylindrical grinding machine Studer Favorit S35

Fuente de Cantos

1,695 km

Cylindrical grinding machine
StuderFavorit S35

Call

Listing

Cylindrical Grinding Machine - Universal SCHAUDT E 450/1000

Germany

5,995 km

Cylindrical Grinding Machine - Universal
SCHAUDTE 450/1000

Call

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank * Gkjdpfxewy Ri Ne Aaysf

See details

Listing

ID / OD Cylindrical Grinder Studer S20 Favorit

Saint-Genix-les-Villages

1,325 km

ID / OD Cylindrical Grinder
StuderS20 Favorit

Call

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, center height: 100 mm, grinding wheel diameter: 350 mm, workpiece weight between centers: 20,000 g, distance between centers: 400 mm, type of input current: three-phase, grinding wheel width: 30 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 30 rpm, feed length Z-axis: 420 mm, grinding spindle motor power: 3,000 W, overall weight: 1,600 kg, year of last overhaul: 2025, input voltage: 400 V, Cylindrical grinder STUDER S 20 Favorit TECHNICAL CHARACTERISTICS: Year of manufacturing: 1997 Centre distance: 400 [mm] Height of centers: 100 [mm] Stroke Z axis: 420 [mm] Working feed Z axis: 100 - 3500 [mm/min] Orientation of table: 0 - 30 [°] Grinding spindle motor power: 3 [kW] Max. diameter grinding wheel: 350 [mm] Max. grinding wheel width: 30 [mm] Grinding wheel bore: 127 [mm] Workpiece spindle nose: W20 Workpiece spindle min. speed: 30 [rpm] Workpiece spindle max. speed: 1200 [rpm] Max. part weight in part holder headstock between centres: 20 [Kg] Workpiece swiveling range: 0 [°] / +90 [°] Workpiece spindle power: 0.5 [kW] Type of attachment tailstock: MT2 Tailstock quill stroke: 20 [mm] Supply voltage: 400 [V] Total power required: 8 [kVA] Machine dimensions: 2350 x 1480 [mm] Weight: 1600 [Kg] INCLUDED EQUIPMENT: x1 paper tape filtration device x1 SONY LH 31A 2 axis digital read out Gkjdpfxswt Tgws Aayef x1 WALDMANN LED lamp x1 internal grinding spindle type: 82060B / Speeds: 11,900 up to 28,400 [rpm] x1 SENSITRON contact indicator x1 grinding wheel balancing device x1 grinding wheel balancing arbor x1 three-jaw chuck FN Ø100 [mm] MT3 x1 magnetic chuck Ø160 [mm] MT3 x1 table-mounted wheel dresser x37 W20 collets x2 half-centres x2 full centres x1 blunt centre x1 pulley Ø105 [mm] for internal grinding spindle x2 external grinding wheel flanges x1 TYROLIT 494271 grinding wheel for external grinding operations Various internal grinding wheels x4 driving carriers Various miscellaneous Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD). Also see surface grinder, lathe, machining center, milling machine.

See details

Listing

Grinding wheel dressing machines Farman FC 250 WF

Cloppenburg

1,088 km

Grinding wheel dressing machines
FarmanFC 250 WF

Call

Year of construction: 2024, condition: used, Grinding wheel holder:: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Gkjdpfx Aaelfil Soysf Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual,

See details

Listing

Tool Room Milling Machine - Universal MACMON M 100 D

Metzingen

1,339 km

Tool Room Milling Machine - Universal
MACMONM 100 D

Call

Listing

Cylindrical Grinding machine TOS Prague BUB 50/CNC

Říčany u Prahy

1,619 km

Cylindrical Grinding machine
TOS PragueBUB 50/CNC

Call

Condition: new, Year of construction: 2026, functionality: fully functional, center height: 250 mm, workpiece weight (max.): 750 kg, grinding length: 2,000 mm, grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill travel distance: 50 mm, workpiece weight between centers: 500 g, distance between centers: 2,200 mm, workpiece diameter between centers: 500 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 2,500 mm, grinding spindle speed: 1,400 rpm, overall weight: 8,000 kg, warranty duration: 24 months, workpiece spindle speed (max.): 560 rpm, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Gkjdpfjpy A Iuox Aayjf Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

See details

Listing

CENTERLESS GRINDER Tschudin ECOLINE 400 CNC

Bienne

1,301 km

CENTERLESS GRINDER
TschudinECOLINE 400 CNC

Call

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Gksdpjiqt S Ajfx Aayef Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. errors and omissions excepted-data given without obligation

See details

Listing

Coordinate measuring machine Zeiss / Renishaw UMC850 / Renishaw Scanningsystem

Pliezhausen

1,331 km

Coordinate measuring machine
Zeiss / RenishawUMC850 / Renishaw Scanningsystem

€55,950

ONO plus VAT

Call

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 500 mm, warranty duration: 12 months, total height: 3,000 mm, type of input current: three-phase, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available. Please feel free to contact us. Zeiss | UMC850 with Renishaw PH10 and SP25 Scanning System, including Renishaw Modus Measurement Software Retrofit coordinate measuring machine with the latest Renishaw technology Year of manufacture: approx. 1990 / Upgraded in 2022 – Light grey wrap Measuring range XYZ: 800 x 1800 x 500 mm Measuring uncertainty MPE (E0): 2.6 + L/300 µm Gkedpfx Aasvxhzusyef Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes - Renishaw PH10 rotary indexing head with SP25-2 scanning system, incl. FCR25-L6 (6-port) probe changer - Latest version of Modus measurement software with STEP CAD import incl. 1 year software maintenance - PC system Windows 10 with two 27'' TFT monitors (NEW), height-adjustable desk included - Control cabinet with up-to-date safety technology - Base plate We are happy to tailor the equipment to your requirements. Optional service packages available: Delivery to the curb | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and configurations available upon request

See details

Advertise here