VS-22300 Electric stacker Still EGVS14, lifting height 4,940mm

STILL EGVS14

Condition: good (used), Year of construction: 2014, operating hours: 1,883 h, load capacity: 1,400 kg, lifting height: 4,940 mm, fuel type: electric, mast type: triplex, construction height: 2,177 mm, empty load weight: 1,600 kg, mileage: 1,883 km, This electric TRIPLEX stacker from STILL, year 2014, is in good condition; The stacker has a capacity of 1,400 kg; Lifts up to a height of 4,940 mm; Passage height is 2,177 mm; ONLY 1,883 hours on the meter; Equipped with FREELIFT; The 2015 battery comes with an external charger and automatic filling system; Order the stacker through our webshop or schedule a test drive! Watch the video on YouTube. Kjdpfsx I H Idjx Aa Eofa

Year of construction: 2021, condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h Kjdpfx Aeg E S Inja Esfa clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 2,078 h, load capacity: 1,400 kg, lifting height: 2,985 mm, fuel type: electric, mast type: simplex, construction height: 1,970 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Mast type: Standard Technical condition: good Front tires Type: Bandages Front tires Condition: 40 - 60% Rear tires Type: Bandages Rear tires Condition: 40 - 60% Battery Volt: 24V Battery Ah: 375Ah Kodpfx Ajukranja Esfa Description: The device may be partially painted, workshop and UVV tested. Prices for this are available on request. with foldable platform, device lifts 2000 kg in the basic lift

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Kfodencd Azepfx Aa Esa Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Year of construction: 2021, condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t Kfedjg Dgymopfx Aa Esa PLC: Siemens S7

Condition: used, Year of construction: 2018, Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Tech Specs: Filling points: 2 Filling valve diameter: 13 mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry Kfodpfx Aael Hx Dbo Eoa

Year of construction: 2023, condition: new, 1 x Niro-Tech vacuum tumbler / mixer with Micro-controller. Model - MS-700 V. Capacity - 700 litres. Max product input - Up to 420kg depending on product. Speed control - 1-9r./min. Installed power - 0.75kW. Vacuum pump power - 0.75kW. Efficiency of vacuum pump - 40m3/h Electrics - 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Ksdjhr Rprepfx Aa Esfa Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 10 weeks for the manufacture of this machine.

Condition: as good as new (ex-display), Year of construction: 2005, functionality: fully functional, Wellmatic Packaging Machine (as new) Suitable for books, brochures, CDs, DVDs, catalogues, spare parts, etc. Utilizes self-adhesive corrugated rollboard. Package length is automatically adjusted to the product length, which is electronically measured at the infeed. The maximum output of the Wellmatic—up to 35 packages per minute—depends on optional equipment such as product feeders, labelling units, as well as staffing and product type. Kfodpfx Ast S Nr Rea Esa The machine was only used for demonstration purposes by Dostal Maschinenbau GmbH and accordingly has very low operating hours. Equipped with Siemens Simatic OP7 (7-DP) control panel, Simatic S7-300 controller, and 2 Lenze frequency inverters with Profibus-DP. Both automatic and manual modes are possible. Outfeed conveyor: length 1,400 mm, working height 920 mm. Infeed conveyor: length 1,070 mm, adjustable working height from 940–985 mm; maximum package/roll width: 450 mm; maximum package thickness: 75 mm; maximum product width approx. 350 mm. The machine features a portable, demountable base frame with a height of 160 mm (to be added to the stated working height). Price negotiable.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: normal Front tyre type: Non Marking Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Sideshift, 3rd valve, rear work light, front work light, Kodpfx Aow U E Uuja Eefa

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: AC, Vertical Packaging Line CAMPAGNOLO C95E-1 + CW14-2.5L (Snacks, Nuts, Cereals, Extruded Products) Complete vertical form-fill-seal packaging line designed for dosing and packing snacks, cereals, or extruded products. The system combines a multihead weigher, vertical bagging machine, and advanced marking and promotional accessories, ensuring high flexibility for different bag types and formats. COMPONENTS Vertical Packaging Machine – Model C95E-1 Kfjdpfx Aoqbryxja Esa • For pillow bags and square-bottom bags • Compatible with mono-seal and bi-seal heat-sealable films • Output: up to 60 bags/min (square-bottom) or 80 bags/min (pillow) • Bag width: 50 – 245 mm  Length: up to 390 mm • PLC control with 7-inch color touchscreen (50 recipe memory slots) • Horizontal sealing driven by brushless motor; vertical sealing pneumatic • Encoder for variable bag length adjustment • Automatic film-splicing device and end-of-film alarm • CE-compliant safety protections (EU Machinery Directive 2006/42/EC) • Power consumption: approx. 3 kW  Air consumption: 300 L/min at 7 bar Included accessories • Round forming tube + additional forming set (round and rectangular terminals) • Square-bottom and gusset forming group • Euroslot hole punch unit • Photocell for centered print registration • Stainless-steel product contact parts (AISI 304) • Bag discharge chute and 350 × 2000 mm evacuation conveyor • Stainless-steel rotating table, Ø 1200 mm Multihead Weigher – Model CW14-2.5L • 14 weighing heads with 2.5-liter detachable buckets • Stepper-motor operation for precision and quiet running • Accuracy: ± 0.2 – 1.5 g (depending on product) • Speed: up to 75 weighings/min for 40 g packs • 10-inch color touchscreen with 99 recipe capacity • Full stainless-steel frame (AISI 304), IP65 protection rating • Auto-diagnostics and self-test functions • Power requirement: 1.1 kW, 220 V, 3-phase, 50 Hz Included accessories • Synchronization bucket with stepper motors • Buffer feeding belt • Support frame with ladder and safety rails • Product elevator (400 × 5500 mm) • Vibrating feeding hopper (170 L) Additional Integrated Options • Ribbon Printing and Marking • Programmable thermal-transfer ribbon coder, print area 32 × 50 mm, 300 dpi resolution, supplied with software for layout and logo management. • Promotional Ribbon Insertion Unit (Extra-Ribbon Group) • Automatic device for attaching promotional ribbons during bag formation. • Chapelet Group (Chain-of-Bags Formation), for forming continuous strips (chains) of connected bags. • Nitrogen Injection System for modified-atmosphere (MAP) packaging to extend shelf life of products.