Stone gripper

STC B.V. Steinzange Steingreifer

Condition: used, Year of construction: 2012, operating hours: 4,000 h, Equipment: all wheel drive, Mini excavator New Holland E 50 B SR. * Operating weight: 4,945 kg * Air conditioning * Year of manufacture: 2012 Hsdpfx Acjup R Uuegjfl * Hours: 4,000 * Machine is in very good condition * Immediately ready for use

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions Hfedpfxst Tqy Ej Acgjl drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, functionality: fully functional, empty load weight: 13,000 kg, axle configuration: 3 axles, suspension: air, tire size: 245/70 R 17,5, Year of construction: 2026, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty Lowbed Semi- Trailer. Air / Mechanical Suspensions. Lider Trailer for Heavy-Duty Trailers High Quality and Durability Manufacturing. Hfodpfx Acjrdd H Tjgsl EU Standards. EBS or Double Line Brake Systems. One-year Warranty for Manufacturing Defects. Customer Requested Colour. 2026 Production

Condition: good (used), Mini excavator bucket, digging bucket, excavator bucket, demolition bucket Hfsdpjb A I Sqefx Acgol -Width: 470 mm -Height: 470 mm -Depth: 600 mm -Intermediate mounting dimension: 135 mm -Hole spacing: 110 mm -Bore: Ø 35 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 80 kg

Condition: used, Year of construction: 2014, operating hours: 15,113 h, * Deep-excavation bucket * Central lubrication system * Camera * Power: 170 kW * Weight: 33,200 kg -----Internal vehicle number: 12435 Hodszyzntopfx Acgefl Errors and prior sale excepted.

Condition: used, Year of construction: 2021, operating hours: 9,564 h, Equipment: all wheel drive, Internal vehicle number: G400207 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Volvo A25G Dumper | Year of Manufacture 2021 | 9,564 Operating Hours We offer a used Volvo A25G dumper, manufactured in 2021. This machine features all-wheel drive and is ideally suited for earthmoving operations, material transport, and use on challenging terrain. Technical Specifications: * Manufacturer/Model: Volvo A25G * Machine Type: Dumper * Year of Manufacture: 2021 * Operating Hours: 9,564 hours * Weight: 22,700 kg * Drive System: All-wheel drive * Vehicle Number: G400207 * Condition: Used * German Machine Hjdpfx Aszfuq Sjcgsfl Inspection possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Hfsdpfeyqxxrox Acgsl Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 39 Total number of tool changer positions: 22

Year of construction: 1995, condition: ready for operation (used), Serial number: 950627 Hodpfjpahwcsx Acgjfl Built in: 1995 Engine number: 03231 Lifting capacity: 8.000 Lifting height: max 5.600 mm Mast height: 4.000 condition: as is

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 Hfedpfxeyq A D Ee Acgol * General inspection valid until: 02/2026

Condition: new, Year of construction: 2025, Field of application: Construction Please contact Kristoff Van Havere for more information - Quick hitch CW05 Hfedpexzaq Njfx Acgol - Weight: 100kg. - For machines 1-2 ton - On stock