Industrial robot

Stäubli TX90L

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact, slim design. Thanks to three mounting options: floor, wall, and ceiling, the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Long reach Advantages Perfect component protection. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance requirements Optimal use of the workspace Technical specifications TYPE TX90L Number of degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options: Floor / Wall / Ceiling Stäubli CS8 CS8C controller Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical specifications: Nlodpewbqwcofx Aa Eek Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation Nedpfx Aegllxgea Eolk - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Nlodpov Hdk Isfx Aa Eek Number of axis: 6 Payload: 5 kg

Condition: used, Year of construction: 2009, operating hours: 50,000 h, functionality: fully functional, load capacity: 12 kg, type of input current: three-phase, Equipment: documentation/manual, We offer a Stäubli TX90 or TX90L robot with CS8C control. The robot is level C after robot maintenance by Stäubli service. The TX90 robot has a reach of 900 mm. The TX90L robot has a reach of 1200 mm. Njdpfx Aourvufja Eslk We supply the robot with a connecting cable between the robotic arm and the control unit. It is also possible to order the SP1 control panel and other accessories. .

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 950 mm, total length: 600 mm, total height: 1,850 mm, air demand: 0.9 m³/h, tank capacity: 250 l, input voltage: 230 V, overall weight: 180 kg, Equipment: cabin, lighting, XTON SANDBLASTER™ is a premium sandblasting and bead-blasting machine, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-circuit system and features a unique filtration system with an integrated dust collector. It is designed for exceptionally quiet operation, enhancing user comfort. The device is equipped with high-quality grain leather gloves, which are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, an option is available for the unit to be made of stainless steel. EQUIPMENT: - Worktable measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Power supply voltage: 230 V / 50 Hz - Nominal working pressure: up to 10 bar - Cleaning efficiency: 25 m³/h - Cleaning grade: SA-3.0 – extensive and deep corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm Nlodpfxjrl R Dlo Aa Eek - Nozzle material: tungsten carbide - Abrasive valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Worktable load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optional stainless steel

Condition: excellent (used), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots in the TX90 series for medium payloads offer the highest possible flexibility for many applications thanks to their compact, slim design. Thanks to the three mounting options - floor, wall and ceiling - the six-axis robots are easy to integrate. The completely encapsulated structure (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Completely encapsulated structure with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Long range Advantages Perfect protection of the components. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics and speed with reduced maintenance effort Optimal use of the work space Technical data TYPE TX90L Number of degrees of freedom 6 Nominal load capacity 6 kg Maximum load capacity 15 kg Range 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options floor / wall / ceiling Control Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Nljdpfovx Tbtsx Aa Eok Advantages Open architecture Compact Good accessibility Reliable Technical data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), language PLC-IEC 61131-3 Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm Nlsdpfxjqnt N De Aa Ejk -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding source: TIG WSM400R -Cooler

Year of construction: 2022, condition: like new (used), year 2022 Robot ABB type IRB 120, variant IRB 120/3/0,6 Nlodpfx Aou Att Uja Esk Weight of robot 25 kg payload 3 kg 6 axis robot box IRC 5 Compact, version 58A 262V, weight 30 kg

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the Njdpsvtgn Njfx Aa Eslk purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Nodpfxsd Ab Tzj Aa Eelk Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- We have many references!