Diesel Forklift

SMV SL25-1200A

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Kjdoun Shgopfx Aa Eonf Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice Kedpfx Aethd Shsa Ejnf E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Lifting height 9 meters Kjdpfxeqiz N Re Aa Eonf

Condition: used, lifting height: 30,500 mm, Year of construction: 2018, operating hours: 2,376 h, Drivetrain Drive: Wheel Weights Kedjxwi Shjpfx Aa Ejnf Empty weight: 13.700 kg Functional Lifting capacity: 15.500 kg Identification Serial number: AMC3588 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 5.83x1.84x2.83 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,685 kg, fuel type: diesel, tank capacity: 155 l, color: beige, power: 102 kW (138.68 HP), output current: 158 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 88 kW (119.65 HP), nominal power (apparent): 110 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,390 mm, total width: 1,058 mm, total height: 1,681 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: AKSA, type of cooling: water, PRP-Leistung: 80 kW / 100 kVA ESP-Leistung: 88 kW / 110 kVA Motor: AKSA A4CRX46TI Abgasstufe: 2 Drehzahl: 1.500 U/min elektronischer Drehzahlregler Betriebsspannung: 24 V Kühlung: wassergekühlt Generator: Aksa AK 480 Spannung: 400/231 V Spannungsregler: SX460 Steuertafel: DSE 6120 - Notstromautomatik Knedpfx Aajwy Ixzs Ejf Batterieladegerät: 5 Ampere Typ: Haubenaggregat; wettergeschützt, schallgedämmt •Not-Aus-Schalter •Kühler mit mechanischem Ventilator •Grundrahmenkonstruktion mit integriertem Kraftstofftank (155 L) und Schwingungsdämpfern •Kühlwasservorwärmung •Spannungs- und Frequenzregelung nach ISO 8528-5 •Aggregat nur für den stationären Einsatz verwendbar

Condition: ready for operation (used), An inspection is possible. Ksdpfx Aen D Hbnoa Eenf

Condition: new, functionality: fully functional, machine/vehicle number: S9234010, Year of construction: 2024, lifting height: 10,000 mm, overall weight: 10,000 kg, load capacity: 10,000 kg, lifting speed: 4,500 mm/s, fine lifting speed: 1,000 mm/s, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, System recently commissioned. Used for only a few hours. Load capacity: 2x10t – total 10t Knsdpfx Aasxgh Rhs Eof Span: 18,240 mm Lifting height: 10 m FEM: 2m All drives frequency-controlled / radio remote control.

Condition: used, functionality: fully functional, machine/vehicle number: A20700034, Year of construction: 2015, operating hours: 10,500 h, load capacity: 30,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,000 mm, power: 194 kW (263.77 HP), fork length: 2,500 mm, empty load weight: 38,500 kg, drive type: Diesel, Heavy-duty forklift - Diesel Chassis number: A20700034 Load center: 1200 mm Fork width: 300 mm Fork thickness: 110 mm Mast type: Standard Knjdpeuh Aupjfx Aa Esf Transmission: Dana TE17000 (brand new) Condition: Refurbished without warranty Technical condition: Good Front tires type: Pneumatic Front tires size: 16.00-25 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 16.00-25 Rear tires condition: 40 - 60% Description: Transmission is new. We have approximately 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in stock at our Oldenburg warehouse in addition to this MAKE - MODEL. Visit our website - hinrichs-Forklifts. Leasing, hire purchase & financing on fair terms are always possible for us. We are also happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann – I am happy to provide you with detailed advice regarding this MAKE - MODEL. By the way: Our specialist workshop is experienced in the repair and overhaul of large machines from 8 tons and up. We are also glad to display your vehicle for consignment sale in our facility. Side shifter, fork positioner, 3rd valve, 4th valve.

Condition: new, 0 8000 kg gear diameter 75 mm 105 mm Width 190 mm length 370 mm height 100 mm loading area rund 100 mm weight Gesamt 70 kg Ksdpfxsvu E U De Aa Ejnf dimensions 800 x 600 x 250 m Heavy-duty castors, 2-part Total load capacity 16 t. with turntable ATTENTION: Only 2 pieces are included in the offer.

Condition: used, Schwerlaststapler von Svetruck in einem guten Zustand. Knodpfx Aexdc Txea Eof Heavy duty forklift of Svetruck in good condition. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test