SMF 350 Grinding Machine

SM Stahl SMF350

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Ndodpfx Adsvxmy Nobjd Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Covered area: 14.8 m2 Ndodpsucdqnofx Adbsd Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range.

Condition: new, Year of construction: 2025, Spray-flood cleaning plant - Parts cleaning plant Washing (600 litres) + rinsing (430 litres); electrically heated; Cleaning process can be carried out by spraying, flooding (injection flood cleaning) and ultrasonic action. basket can stand, swivel or rotate during the cleaning process (preselectable via the program) Drying with hot air and vacuum drying Basket useful dimensions: LxWxH 600x400x300h mm max. loading weight: 150kg Ndsdpfx Adshu Sg Iobod loading table in front of the unit included control: Siemens S7-1200 with 20 programs

Condition: excellent (used), Year of construction: 2020, READY TO USE IMMEDIATELY! This degreasing system operates under vacuum with modified alcohol. Degreasing of metal components contaminated with oil and chips from machining. Suitable solvents: modified alcohols Class AIII hydrocarbons (flash point > 55°C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Lubrication Corrosion protection (spraying) Cartridge filter Very good condition (system has been used very little) 6-month warranty From Service Metalclean AG System processes: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Specifications: Nodpfx Adehg Ugisbedd Basket dimensions: 480 x 320 x 200 mm (h) Maximum load: 50 kg Average batches per hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Connected load: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Condition: new, Year of construction: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin from the year of manufacture 2018. The unit is in its original packaging and is available in our warehouse. You are welcome to arrange an on-site viewing appointment by prior telephone arrangement. Ndjdpsl D Ex Dofx Adbed

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Ndsdpst Hagnofx Adbsd Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 2005, condition: like new (used), functionality: fully functional, empty load weight: 1,600 kg, maximum load weight: 1,000 kg, inner dimension height: 1,200 mm, inner dimension length: 1,390 mm, inner dimension width: 1,390 mm, nominal power: 64,000 kW (87,015.68 HP), pump capacity: 500 l/min, pump pressure: 450,000 bar, water tank capacity: 800 l, machine/vehicle number: 25191, A machine for industrial cleaning of machinery and parts. It has 3 washing chambers, one main and 2 auxiliary. The technical condition of the equipment is excellent - used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main parts of the machine: Door to washing chamber (on cylinders). Upper washing nozzle Lower washing nozzle Pressure piping Control cabinet Washing pump Auxiliary pump 1 Auxiliary pump 2 Water heater (for each chamber) Drain valve Water level sensor Basket for washing elements Oil separator Steam vent Water pressure indicators Automatic water filling and chemical dosing system In addition, we offer a reverse osmosis water filter in the set. Nsdpfx Aorkz Stodbjdd

Condition: used, Year of construction: 1999, control Siemens 840D Number of axles 4 St. 2 Ndodpfx Adoqn A Rvsbsd toll turrets 160 tool taper HSK 63 spindle turning speed range 24.000 U/min filter unit Ja chip conveyor Ja kW

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] Njdpfx Adjuhcbcobsdd - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, Ndjdpsf Nku Rsfx Adbed wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.