SCHNELL Multifunction Center Bar Wiser 22 Dual

SCHNELL Multifunction Center Bar Wiser 22 Dual

Year of construction: 2003, condition: refurbished (used), machine/vehicle number: 50/140/03, GENERAL CHARACTERISTICS Ø Grinding Wheel Dimensions (OD x ID x width) 508 mm Regulating wheel width 254 mm Diamond dressing speed Ø508 x 254 mm Lubrication (Auto/Manual) centralizado automático / automatic lubrication CNC Brand FANUC CNC Model Series 18i - T CNC Axes Nº 8 Grinding wheel width 254 mm ELECTRICAL CHARACTERISTICS Total Power 25 kW Voltage 220/380 v DIMENSIONS AND WEIGHTS Bdjdpfsd Nw T Isx Alcoc Long 2150 mm Width 2200 mm High 3400 mm Weight 8000 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Bodedqzbropfx Alcjdc Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N Bedjxyllvjpfx Alcjdc We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, Bjdpjtpu Szofx Alcedc The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: excellent (used), Year of construction: 2004, operating hours: 96,830 h, clamping force: 1,200 kN, screw diameter: 40 mm, injection pressure: 1,300 bar, injection weight: 231 g, Engel Victory 500/120 Tech (145) without hopper General information Bedpevt Sbbjfx Alcsdc Product Code: 145 Availability: In Stock Year of production: 2004 Brand: Engel Technical data Shot Weight: 231 g Clamping Force: 1,200 kN Screw dia: 40 mm Injection pressure: 1300(2020) bar Tie bar distance: Tie-bar less Platen size: 740 x 680 mm Type of controls: CC200 Language: German Power: 41 kW Workinghours: 96830 h Weight: 7400 kg Dimensions: 5 x 1,7 m Hopper: No Core pull: Yes Euromap: Yes

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. Bdjdpfx Alovtp Uxococ It can cut materials up to 40 mm in thickness. Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Materiel Thickness: Cut up to 40 mm

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Bdjdjwkih Espfx Alcec

Year of construction: 2006, condition: refurbished (used), Multifunction Center Bar Wiser 26 Dual, manufactured by SCHNELL Completely revamped "as new" 1 bar up to: 8/22 mm 2 bars up to: 8/20 mm 3 bars up to: 8/12 mm Bdsdovtx E Hspfx Alcjc Bar length: 12 m 1 bar up to: 8/22 mm 2 bars up to: 8/20 mm 3 bars up to: 8/12 mm Bar length: 12 m

Condition: used, SCHNELL Automatic Stirrup bender PRIMA R 12 Bdodpfx Aloymcbijcoc Full revamped “as new”, Up to 12 mm Main Characteristics - Single strand: 6 / 12,7mm - Double strand: 6 / 10 mm - Max bending angle: 180° - Central mandrel diam.: 20 / 50 mm - Max pulling speed: 95 m/mm to 310 m/mm - Max bending speed: 1450°/sec - Bending distance: 1500 mm to 4´-11” - Avg. power consumption: 3 kW/h - Working pressure: 7 bar - 90/100 psi Single strand: 6 / 12,7mm Double strand: 6 / 10 mm Max bending angle: 180° Central mandrel diam.: 20 / 50 mm Max bending speed: 1450°/sec Bending distance: 1500 mm to 4´-11” Avg. power consumption: 3 kW/h Working pressure: 7 bar - 90/100 psi

Year of construction: 2004, condition: ready for operation (used), A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible. Bdedoygmdbepfx Alcjc