SCHNELL Cutting bench optibat 100/3/12 year 2013

SCHNELL Cutting bench optibat 100/3/12

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Iedpsuwrv Defx Am Ieia

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Iisdov Dvllopfx Am Isa Elite Robot CS620 (1750mm range) with programming flange and software Fronius TPSi 500 Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Machine frame System is ready for welding immediately

Year of construction: 2016, condition: used, MEP cutting & bending machine, SYNTAX 28 Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: up to ∅20 mm (#6) • Bar presence detector • Multifunction feeding: gripper and feed rollers Iisdpfx Asxl Avvem Isa • Dual shears • Bending pins accordingly to international rules Video disclaimer: This video is the manufacturer's promotional demonstration for the SYNTAX 28 model. It does not show the specific line currently for sale. Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: Up to ∅20 mm (#6)

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 Iisdpfx Amer Nfvmj Ija With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm Iiodpfx Amonah Tde Ioa As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D Iedpfx Amjx E Eihs Ieia WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Ijdowlrukjpfx Am Ioia Model: Kompak EKO 316 Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Travel speed: 30 m/min Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Anti-collision detector with inductive electromechanical impact control Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours - BEKO DryPoint RA air dryer

Condition: used, empty load weight: 9,820 kg, maximum load weight: 35,180 kg, overall weight: 45,000 kg, first registration: 04/2014, next inspection (TÜV): 06/2024, loading space length: 9,500 mm, loading space width: 1,530 mm, suspension: other, tire size: 385/65 R 22,5, color: other, gearing type: other, front tire size: 385/65 R 22,5, driver cabin: other, emission class: none, Concrete internal loader, concrete internal loader, internal loader for concrete parts, Wheelbase (mm): 6640 to the end of the vehicle * Support device * BPW half axles Iijdpfovv T S Tsx Am Ioa * Spare wheel * Drop support * Hydraulic suspension * Hydraulic axle compensation * Hydraulic inner swing arm * Platform length 2,950 mm * Pump unit * Drum brake * 6-way manual tensioning * Fully lowerable * Central lubrication system We expressly reserve the right to sell the vehicle prior to sale, as we also offer this item on other portals. Information on accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Pictures have been partially edited and are for initial viewing only. If you are interested, please contact us and request current pictures.

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm Iiodpsrh Iw Tjfx Am Ioa · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: used, Technical details: bending angle max.: 0 - 225 ° operating voltage: 380 V Iiedox Adbnspfx Am Ija revolutions per minute: 5 -16 U/min Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *