CNC LATHE
Schaublin 125-CCN R-TM A2-4

Name: Schaublin 125-CCN R-TM A2-4
Brand: Schaublin
Availability: InStock

Year of construction

2004

Condition

Used

Location

Bienne

Show map

Machine data

Machine type:: CNC LATHE

Manufacturer:: Schaublin

Model:: 125-CCN R-TM A2-4

Machine number:: 350735

Year of construction:: 2004

Condition:: refurbished (used)

Price & Location

Location:: Rte de Soleure 145, 2504 Bienne, Schweiz

Call

Details about the offer

Listing ID:: A6779371

Reference number:: 2210081

Update:: 01.09.2025

Description

Manufacturing origin Swiss
Voltage 380/50/3
Netweight 1570 kg
Custom position 8458.1120
Dimensions 1830x1260x1700 mm

TECHNICAL DATA

Capacities
Max. turning diameter Ø 270 mm
Max. swing over carriage Ø 115 mm
Centre height over carriage 60 mm
Turning length B32 265 mm

Headstock A2-4
Spindle for Schaublin collets W20 / W25 / F38 / B32
Spindle speed, continuous 50 - 5'000 min-1
Spindle inner diameter (without chuck key) 39 mm
Max. bar passage in collet W20 14,5 mm
Max. bar passage in automatic chuck 32 mm
Max. recommended turning diameter 200 mm
Fodpfxohr Rtnj Ad Negi

Pneumatic clamping
Adjustable axial clamping force, force at 5 bar 1'150 daN

Cross slide
Cross travel, X axis 180 mm
Resolution, X-axis (at radius) 0,0005 mm
AC motor drive, continuous / intermittent torque 4 / 14 Nm
Ball screw, diameter x pitch Ø 20 x 5 mm
Longitudinal travel, Z axis 390 mm
Resolution, Z axis 0.001 mm
AC motor drive, continuous / intermittent torque 4 / 14 Nm
Ball screw, diameter x pitch Ø 32 x 5 mm

Feed rates
Working feeds, X and Z axis, stepless 0 - 5 m/min
Rapid feeds, X and Z axis 8 m/min
Feed forces, X / Z axis, continuous 503 / 503 daN

Tooling system: Revolver
Standardised tool holder attachment VDI 20
Number of tool stations 8
Number of live tool stations 4
AC motor drive, continuous / intermittent 0.55 / 1.1 kW
Spindle speed, stepless 30 - 5'000 min-1
Max. tool cross-section 16 x 16 mm
Integrated coolant and indexing in both directions yes

Cooling
Tank capacity 55 L
Pump capacity 10 L/min
Pressure 1.7 bar

Pneumatic tailstock
Taper of the spindle sleeve Morse 3
Spindle outer diameter 45 mm
Spindle stroke 70 mm
Adjustable contact force 25 - 260 daN

Tip height from ground 1'162 mm

errors and omissions excepted data gived without obligation

Documents

6779371-01.pdf

Seller

Registered since: 2014

52 listings online

Call

Send inquiry

Telephone & Fax

+41 32 34... show

Fax:

These listings may also fit your interest.

Listing

CNC Turning- and Milling Center DMG MORI NLX 2500 SY / 700

Germany

5,995 km

CNC Turning- and Milling Center
DMG MORINLX 2500 SY / 700

Call

Condition: used, Year of construction: 2018, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm Fgjdew Av T Sjpfx Ad Nei standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 20 / 20 BMT40 : 5.5/5,5/3,7 kW speed of driven tools: 10000 1/min total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Robot interface High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

See details

Listing

Conventional lathe CONTUR SJ-860/3300 XL

Wetzlar

1,187 km

Conventional lathe
CONTURSJ-860/3300 XL

Call

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 620 mm, spindle bore: 153 mm, turning diameter over bed slide: 860 mm, center height: 430 mm, turning length: 3,000 mm, quill stroke: 250 mm, quill diameter: 120 mm, total length: 5,250 mm, total width: 1,700 mm, spindle speed (max.): 680 rpm, spindle speed (min.): 8 rpm, bed width: 510 mm, overall weight: 6,800 kg, quill mount: MK 6, Center height: 430 mm Center distance: 3300 mm Spindle bore: 153 mm Spindle nose (DIN 55026) A2-11 Gear stages: 12 Spindle speed range: 8-680 rpm Drive power: 22 kW Weight approx. 6800 kg Features include Fgjdpfx Ajm E U Ufsd Nji Rapid traverse in X- and Z-axis Star-delta gearshift Fixed steady rest with rollers (max. clamping range 300 mm) Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Foot brake Manual central lubrication Complete coolant system with rear splash guard and splash guard on the slide Sliding chuck guard Switch rod with 4 adjustable cams Machine light Fixed center point Set of machine mounting plates

See details

Listing

Niederlangen

1,037 km

Hydr. pressbrake
GWF-MENGELEHB 125 - 3

Call

Condition: used, pressure 125 t chamfer lenght 3550 mm distance between columns 3050 mm stroke 250 mm table width 120 mm table height 900 mm column arm 320 mm return speed 100 mm/sec working feed 10 mm/sec control Cybelec DNC 70 quantity of oil ca. 250 l total power requirement 11 kW weight of the machine ca. 11 t dimensions of the machine ca. 4 x 2 x 3 m * new control Cybelec CypTouch 12 - 3 axes Fgjdpfokpwubox Ad Nei * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) * rear protective device (protective grille) Machine is available in about 1-2 months !!

See details

Listing

Grońsko

1,632 km

Four Side Planer
WEINIGUnimat 23

€12,500

Fixed price plus VAT

Call

Condition: good (used), WEINIG Unimat 23 four-sided planer max planing width 230mm max planing height 140mm spindles diameter 40mm 8 spindles ( last 2 universal) Spindles fully adjustable up and down; right and left Fgodjiq Dphspfx Ad Noi Feed on cardan shafts with smooth adjustment 5 pulling rollers in the tabletop electric height adjustment of rollers sturdy planer, proven in good condition length of the machine 605cm, weight +-5000kg

See details

Listing

Naprawa

1,978 km

Lamella band saw
TOPCUT650

Call

Condition: new, Main features of the machine: Fjdpfeii Rydjx Ad Njgi The TOP CUT 650 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 650x300 mm Transport belt width: 625 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Return belt dimensions: 5460 x 330 mm Saw band diameter: 710 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 7 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 22 kW Total power: 25 kW Weight: 2600 kg Dimensions: 2800x2400x2000 mm

See details

Listing

Plate Shear - Hydraulic MENGELE Hydrl. Tafelschere

Ennepetal

1,084 km

Plate Shear - Hydraulic
MENGELEHydrl. Tafelschere

Call

Listing

Hergensweiler

1,423 km

Welding turn table
ProtecRB 3000

Call

Listing

Montichiari

1,603 km

Bed milling machine
SachmanT 314

Call

Listing

CNC turning and milling center Mori Seiki NL 2500 SY/700

Sweden

1,740 km

CNC turning and milling center
Mori SeikiNL 2500 SY/700

Call

Condition: excellent (used), Year of construction: 2011, operating hours: 17,813 h, functionality: fully functional, turning length: 700 mm, turning diameter over cross slide: 750 mm, turning diameter: 366 mm, spindle motor power: 26 W, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, mount diameter: 12 mm, rotational speed (max.): 6,000 rpm, Make Mori-Seiki Moderl NL 2500SY/700 Year of manufacture 2011 Control system MXS 850 IV Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Fjdpfx Adjwtfwhe Negi Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

See details

Listing