Turning head

Sandvik R391.B03R-40F53 A

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Nedpfek S D N Eex Aghjwp Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm diameter of the clamping disk 2000mm length 3250mm, width 1780mm speed from 0,05 to approx. 0,6 rpm.

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch Njdpfx Aefxw H Asghowp - Potentiometer for infinitely variable speed control

Condition: used, Pallet with T-slots suitable for DMG DMC 100 H and DMG DMC 100 U. Several pallets still available. Nwsdpfjqx Uh Nsx Aghjp

Condition: like new (used), Year of construction: 2000, Welding turntable Heinrichsglück 15 tons load capacity Condition as new complete with accessories hand remote control, foot remote control, manual, documents, electrical plans everything available Nwedjhcbmpjpfx Aghop dimensions: Diameter of the clamping disk 2200 mm Height tilted to the middle 1450 mm Height horizontal 1800 mm speed 0,025 to 1,1 rpm Tilting range 0 to 135 Length 3400 mm Width 1800 mm plus 300 mm Dead weight 8000 Kg

Condition: new, Year of construction: 2024, Protec KT 10000 Welding Positioner Nsdpfx Aeid Szveghswp Complete set with handheld remote control 10,000 kg load capacity Clamping plate diameter: 2000 mm Tilted height to center: 1600 mm Horizontal height: 1920 mm Stepless speed from 0.01 to approx. 0.35 rpm (higher speeds possible) Tilting up to 120° Length: 2800 mm Width: 1920 mm Foot remote control available for an additional €390

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments Njdpsmhhf Sefx Aghewp - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, length 1200 mm Nwodpjtq I Rqofx Aghsp width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: new, BRAND NEW ROTARY TABLES // ROTARY-SLIDING TABLES Positioning, infinitely variable rotation and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Only inquiries from Germany will be processed Nsdpfom Tv Azsx Aghjwp

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Njdpfx Ageif Rlbshewp Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: used, plate width 3000 mm plate depth 5000 mm plate height 400 mm Nwjdpogrnfgefx Aghep weight 20 t dimensions of the machine ca. 5 x 3 x 0,5 m Table length 5000 mm Table width 3000 mm Table height 380 - 400 mm Machine weight approx. Approx. 20000 kg Space requirement approx. 5 x 3x 0.5 m