Fitter s bench

SANDERS ANTHRAZITGRAU RAL 7016

Condition: new, The 40 MP is a single-head saw with top-down cutting action, featuring a saw blade diameter of ø 400 mm. Gtjdperfapaefx Afnju Comparable to Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. The saw table can be manually adjusted to an angle of +/- 45°. The saw head can be manually tilted from 0° to 45° outwards. The 40MP single-head saw is equipped with horizontal clamping cylinders for secure profile clamping, minimal spray lubrication, and mechanical protection of the sawing area. Please also see our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Gsdpfxju Impme Afnjtu Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: used, roll diameter / mm Gtjdjuddmrspfx Afnju throat / mm workpiece height / mm Table dimensions: 615x615mm

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m Gtsdpfxjd Iipmo Afnju PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Gtjdpfjtr Ud Ssx Afnsu Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Gjdpfx Afomdn Dxonotu

Condition: excellent (used), functionality: fully functional, Pantograph with 2 controlled axes, ideal for machining aluminum, PVC, and steel profiles up to 2 mm, with the option to process stainless steel (optional). The work cycle is managed through intuitive software that guides the operator with simple instructions on the touchscreen display. The USB connection allows for easy linking to a PC. The four-sided rotating worktable ensures very high precision by using shorter tools, thus avoiding through machining and the resulting issues of vibration and noise. It is equipped with a quick tool change system with ISO 30 taper. A retractable, pneumatically operated guard protects the operator during machining. Gsdpfxox U Dg Do Afnjtu

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Record Power PT310 Planer Thicknesser with a planing width of 310 mm. The machine is in its original condition and comes with full warranty. Technical specifications: - Motor power: 3 HP / 230 V connection - Planer table length: 1,407 mm - Planing width: 310 mm - Cutter block diameter: 70 mm - Cutter block equipped with 3 knives - Maximum cutting depth: 3 mm - Feed speed: 7 m/min - Weight: 202 kg Shipping by freight: Austria: €80.00 incl. VAT Germany: €100.00 incl. VAT South Tyrol: €120.00 incl. VAT The planer is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Gtsdeviu S Uepfx Afnju Related terms: surface planer, thicknesser, planer, surfacing, thicknessing Reference: ZXPT310-A

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Model: Primus VCD Precision Lathe Year of manufacture: 2017 Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Scope of delivery: Godpfx Afsx Nkdxjnetu - Documentation

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Press force: 600 kN Weight: 4000 kg Power: 10 KW Gedpfx Asp R Ircofnetu