Control unit

Rex

Condition: used, transversal substructure for planing machine Bjdpfx Aajimz Ego Ujcw Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained REX Hobelmaschine Querverstellung REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm

Condition: used, Year of construction: 2005, functionality: fully functional, REX BIGMASTER 410-K (A+D+FR+FL+AFV4+MVG+2.FR+2.FL+HFRo+HFRu+AZG) Bcsdsu Sg T Tjpfx Aa Uow REX Georg Schwarzbeck GmbH & Co. KG Year 2005 REX= HEAVY DUTY 4-SIDE PLANING AND MOLDING MACHINE TYPE BIGMASTER 410 - K Machine with exchangeable cutter heads K lower planing shaft A upper planing shaft D vertical shaft/right side FR vertical shaft/left side FL chamfering device (4 spindles) AFV4 mid feed device MVG 2. vertical shaft/right side /profiling shaft 2.FR 2. vertical shaft/left side /profiling shaft 2.FL upper horizontal molding/profiling shaft HFRo lower horizontal molding/profiling shaft HFRu Heavy type out feed device AZG Machine with constant table height and adjustable upper part (height adjustment by 8 columns)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Meat Mincer Düker-Rex AW 98 / 1400 Complete V2A stainless steel construction. In very good condition with sorting device. See photos. Year of manufacture: Würzburg 07 / 2021 Machine is plug-in ready and workshop-tested. Further details upon request. Payment by cash or advance bank transfer. Sale only to commercial buyers. No warranty, no liability. Bsdjynkb Hjpfx Aa Uscw

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, planing width: 620 mm, planing height: 300 mm, working width: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22.500 Year of Manufacture: 2003 General Data Machine type: Planing and profiling machine with chamfering units Bedoymgxxspfx Aa Uecw Total connected load: approx. 222.8 kW Feed speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-duty outfeed unit (AZG): 4 rollers, pneumatic roller pressure, universal joint shafts Tools / Units • Planing spindles: Bottom planing spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Left working spindle: 22 kW • Chamfering units: 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW Speed: approx. 5,600 rpm, height adjustable depending on chamfer width Total number of processing tools: 8 (4 planing/working spindles + 4 chamfering units) Drives Feed unit: approx. 32 kW • Auxiliary motors (individually): Height adjustment (thickness) Width adjustment Chip removal adjustment Machine adjustment Extraction system Individual extraction nozzles Ø 160–200 mm depending on unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planing heads and tools (see photographic documentation in the appendix) Switch cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality dimensional timber such as structural solid wood (KVH), Duo/Trio beams or glulam. Additionally, machines of the SUPERMASTER series are also used in the production of cross laminated timber (CLT). Thanks to the powerful feed system, large, heavy, wet, frozen as well as small, fine workpieces are processed effortlessly by the SUPERMASTER.

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Bcedpfxjwp Ebls Aa Uow Cutting length:

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg Bcjdpeyi Tn Ssfx Aa Usw ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) Bedpfx Ajyitzxja Uscw - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Bcjdpfx Aaewgbw Re Ujw Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), table length 1,500 mm / width 760 mm, Motor 4.0kW (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested >>REX New price over 20,000 € Bodpfx Aasimz D Uo Uecw

Condition: excellent (used), Head machine rex konig 5 rows with trays depositor recondition with new electric pistons and belts Bodpfxeyif Hke Aa Uocw

Condition: used, Trimming Saw / Edging Line / Twin Edger with Automatic Scanning and Adjustment consisting of: Board Infeed: * Roof chain cross conveyor (behind the frame saw roller table) * Transfer table to S-conveyor * S-conveyor Cant Infeed: * Vertical lift * Roller conveyor * Lowerable cross conveyor Trimming Machine: * Infeed table / cross-cutting table * Optimes automatic edger infeed table with 4-sided scanning system * Esterer BNK circular saw for trimming * 2-strip slat separator Bcedpjw Dn Ecofx Aa Uow * Outfeed table (main product to the right, side boards to the left) Technical data – Optimes BNK: 3 saw blades adjustable Cutting height: 160 mm Max. board length: 8 m Motor power: 2 x 90 kW Year of manufacture: 1987 The trimming line is located in Germany, between Augsburg and Stuttgart, in a smaller sawmill with an annual cutting volume of approx. 15,000 solid cubic meters. Maintenance and servicing have always been carried out properly. Adjustment shafts, infeed table + chains, gears, two drive motors, and the drive chains have all been completely replaced or renewed. Inspection during ongoing operation is possible at any time.

Condition: used, Spare parts for planing machine spare parts REX planing machine spare parts REX Pinneberg REX JUMBO REX HOMS REX TIMBERMASTER Bcsdpfx Aaoqwgtue Usw REX UNI

Condition: excellent (used), Grinder vinkl REX Bcedpfxefiwqls Aa Ujw

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. Bcedpfowfqh Aex Aa Uow After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm Bjdpohikplefx Aa Uscw - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg