Spotting Press

REIS TUS 70 OK 70

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Lhsdpfxov Np H Hs Aalsd Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Condition: used, pressure 160 t passage width / mm Lodpfx Aeiulkqjalshd stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed Lhsdewyda Ujpfx Aalsd star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Year of construction: 2018, operating hours: 3,977 h, functionality: fully functional, Morbark Woodhog 3400XT Ledpfx Aowlzdzealehd 3,977 hours In good condition with transport dolly Location: Belgium

Condition: excellent (used), Year of construction: 2020, HPPA through-feed press manufactured by Famad Paczków, year of manufacture 2020. The press is designed for through-feed gluing of door packs, MDF boards, plywood, veneer, etc. It features a pneumatically lifted chain conveyor for loading and unloading, and can operate independently or as part of a production line. Ljdpfxevla A De Aalohd

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Lhedpfxjur Ravj Aalsd Hydraulic pump missing Control is missing Power supply unit missing

Condition: excellent (used), Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 093, overall weight: 30,000 kg, transport width: 2,500 mm, Doppstadt AK630 with very few operating hours. Used as a demonstration machine. Lsdpfx Aewx Schsalshd

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Lsdpfx Aasxx Tigjlshd Delivery date to be arranged Available from 06/2026

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Lhodpfx Aaetdnnmelsd

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits Lhjdpfjx D Dx Aox Aalsd • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)