Automatic punching machine

RASTER RST 500 - 1250 DH

Condition: excellent (used), Year of construction: 1974, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 3 Standard-slide-units 3 Narrow-slide-units Working range: Chedpfxopq H Upj Ap Dod Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: used, functionality: fully functional, total height: 1,900 mm, total width: 1,200 mm, overall weight: 1,200 kg, input voltage: 400 V, Equipment: documentation/manual, type plate available, Precision cross-honing machine Used Sunnen Eclipse EC-3500 CGM-27 Bore diameter – Honing range: 1.5 – 165 mm Stroke length – Honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Csdsyx Dv Hspfx Ap Dehd Stroke rates: 60 – 500 strokes Total power requirement – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1200 kg Depth: 1.6 m Width: 1.2 m Height: 1.9 m SICK safety light curtain Oil filtration / filter system for the honing oil is integrated – spare filter cartridges available Horizontal cross-honing machine / honing machine, type EC 3500, and operating manual for the honing machine Documentation/manual, nameplate available An inspection while the machine is powered on is possible after prior appointment. Price upon request All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm Chedpfx Apjw T Tlro Ded All technical details are given without obligation and subject to errors or omissions.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 12 kW (16.32 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, total length: 1,395 mm, total width: 1,600 mm, total height: 2,045 mm, actuation type: electric, fuel type: electric, Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Available immediately ⚡ Professional support! Plus VAT, plus shipping costs. ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Available immediately – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty Codjghf R Uepfx Ap Dehd Available from stock – no production lead time ➖➖➖➖➖ ⭐ Matech powder coating oven with electric heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Available immediately ☘️ Professional curing ✅ Electrically heated powder coating oven ✅ In-stock item – available immediately ✅ No waiting time for production ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at the end of the curing time ✅ Insulated door with a special locking system ✅ Stable sandwich panel construction ✅ Good heat retention due to strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shutdown after process completion ✅ Can be used with a mobile workpiece trolley ➖➖➖➖➖ Technical specifications: ✔️ Model: MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L x 1000 mm W x 1000 mm H ✔️ External dimensions: 1600 mm L x 1395 mm W x 2050 mm H ✔️ Electrical heating power: 12 kW ✔️ Fan capacity: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total power: approx. 14 kW ±10 % ✔️ Digital temperature control ✔️ Temperature continuously adjustable up to 220°C ✔️ Inside: 1.2 mm galvanized steel ✔️ Outside: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 unit ➖➖➖➖➖ Secure your in-stock item now! This unit is currently available 1x in stock. Ideal for workshops, smaller production areas and companies looking for a reliable electrical solution for professional powder coating on short notice. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models. Feel free to contact us for leasing, hire purchase or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from the service and quality advantage! ✨ Request a quote now – make your company ready for professional powder coating! ☀️ 2 YEARS WARRANTY ☀️

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Chjdpfxjf Rt Ubs Ap Djd

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Chedpfezb U Epsx Ap Djd Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Chedpfjyvuuzjx Ap Ded

Condition: reconditioned (used), BSTA 110H, with BBV 202 /120 feeder Mechanically overhauled. CE-conversion possible. Contact us for details! Cjdpfx Apoizi Hmo Djhd

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Chodpswh Ri Esfx Ap Ded Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: new, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). Chjdpfx Apevbdq Ro Dod The machine has between 12 and 16 axes, below are the 12 basic axes: - wire feed - wire rotation - nozzle rotation - servo spinner - 8 independent slides (8 axes) Optional (up to 4 axes): - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for lifting the second (German-type) extension spring eyelet. Maximum feed speed: 54 m/min. Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. If you have any further questions, please do not hesitate to contact us.