Vibratory Finishing Machine

Rösler R 425/2700 SDK

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Ledpfxevpgq No Adqori Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Lredpfx Aoqakbrsdqsi Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Lredpfx Adsqpdkceqei - Capacity: about 7,500 - 15,000 dowels/hour

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Ledpfxspugwij Adqjri Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 2011, Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra Lredpfx Adjg Saqvjqsi - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 - max. belt dimensions 3500 x 30 mm - max. contact pulley diameter 200 mm - motor power 4 kW 2 x polishing stations, - polishing wheel diameter 350 - 600 mm - power 5.5 kW Gripper change cabinet Belt conveyorInteroll Automation GmbH - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as you can see on the video We have 4 such cells. It is possible to make every detail as you can see in the video

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck – Diesel Load center: 600 mm Lrsdpsuahtbsfx Adqsi Fork width: 200 mm Fork thickness: 100 mm Mast type: Duplex Transmission: ZF 3WG171 Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires size: 12.00 x 20 Rear tires type: Pneumatic Rear tires size: 12.00 x 20 Description: Side shifter, fork positioner, KALMAR SV/GV – fork carriage with central leveling, width B = 2,500 mm, Terminal-West quick-change system for SV/GV fork carriage. Additional hydraulic function including hoses. Kalmar EGO comfort cabin, air conditioning system ECC with fresh air filter, tinted windows and air-suspended, leather-reinforced Grammer Actimo XL driver’s seat. Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming. 12/24V power inverter including 2 x 12V and 2 x 24V sockets. Load weight display on screen. Direction change switch on lift hydraulic lever. Engine heater 220 V. Accumulator for lifting hydraulics. Hydraulic oil cooler with fan. Mast tilt 14° forward and 10° backwards. Adjustable height LED beacon. Kalmar knife-type fork tines, fork length l = 2,400 x 200 x 100 mm. Raised air intake for air filter incl. pre-separator. Mudguards on drive axle, mudguards on steering axle. Anti-slip coating on front wheel covers and tank. 2 extra LED headlights on mast beneath standard headlights. 2 extra LED headlights on front cabin corners facing direction of travel. 6 extra LED headlights on rear cabin corners with protection bars. Blue Spot front and rear. Automatic central lubrication system on steering axle and fork carriage. Sensor-controlled Forrex fire extinguishing system – automatic and manual activation. 6 Kg (powder) fire extinguisher EN3. Rear-view camera mounted on cabin roof with color monitor in cabin. Mast camera – connected to a monitor in the cabin (combined with rear-view camera). Tire pressure monitoring system.

Condition: good (used), White Lodpfxoudvg Rs Adqjri Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Lg.No. 13439 Technical data: - Polishing wheel- grinding wheel dimension approx. 300 x 40 x 76 mm - grinding belt dimension approx. 3500 x 50 mm - contact wheel dimension 400 x 50 mm Lrsdpfjk D Ewgsx Adqei - drive speed 1450 rpm - drive 400 V / 1,8 kW - space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Ljdpfeg D Rfmsx Adqjri

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI Lsdpfx Adsfbgz Ijqeri type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm