Three-jaw chuck

RÖHM

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Hjdpfx Ahov Hzqxj Henw Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Hnsdpfx Ahjln Uixo How Diameter 310 mm Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Pitch circle diameter 171,4 Chuck height including flange 135 mm Weight 53 kg

Condition: used, Chuck outer Ø: 240 mm Bore: 75 mm Overall height: 105 mm Hnsdpfx Ahsdaqdme Hew equipped with short taper chuck flange according to DIN 55027, size 6 incl. jaws stepped outward and inward, chuck key

Condition: new, 0 945 x 605 x 605 mm operating pressure 2,2 - 5,5 bar dimensions 1,0 x 0,61 x 1,65 m Hnsdpfxsupw Sms Ah How 1300 x 1000 x 750 cm Air consumption 250 l/min. weight of the machine ca. 0,09 t

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange Hodpfx Ahsduacqs Henw -Chuck flange: with driving pin -Outside: Ø 192 mm -Camlock cone size: 6 (106 mm) -Bolt circle: 2 x 160 mm bolt diameter 18 mm -Weight: 6 kg

Condition: new, 0 830 x 530 x 530 mm operating pressure 2,2 - 5,5 bar Air consumption 250 l/min. Hedpeupw Sgjfx Ah Hjnw weight of the machine ca. 50 Kg 0,95 x 0,65 x ,7 cm

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Hnsdpfxewcaute Ah How -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 85/66/H62 mm -Total weight: 1.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Number: 1x set of interchangeable jaws available -Price: per set Hnsdpfxjt Acv Rj Ah Hsw -Dimensions total: 70/60/H55 mm / 70/60/H54 mm -Total weight: 1.1 kg/set

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm Hnedpfxodrwl Is Ah How -Passage: Ø 76 mm -Weight: 26 kg

Condition: used, chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm Hedeuypzvepfx Ah Hjnw -Inside: Ø 100 mm -Hole circle: Ø180 mm/ M10 / Ø230/10 mm -Dimensions total Ø 250 x 23 mm -Weight: 6.1 kg