Cutting Line Autotrimm PACE

Polar 137XT-AT

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: Dodpfsxd U Sasx Afnjkh The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: excellent (used), MAN ROLAND 705 LV 2010 DD Five colors with coating Airglide delivery RCI Fully Automated Plate Change System (APL) Roland Deltamatic dampening Coater tower (chambered doctor blade system) Automatic size adjustment Suction feed table Diagonal register DirectDrive QuickStart Screen roller Sheet decurler Extended delivery Grafix powder spray Roland Seccomatic IR dryer Ink temperature control Technotrans combi unit Dampening unit cooling device beta.c Carton guide Blanket and impression cylinder washing device Ink unit washing device IR dryer QuickChange Air Weko powder device Type AP 262 Dsdpfox I Nk Iex Afnjkh Antistatic device Eltex Up to 16,000 sheets/hour Excellent condition

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Djdpfx Aewfq T Sofnskh Discharge of scrap from under the machine directly to the container.

Year of construction: 1993, condition: good (used), Built in: 1993 Size: max 350 x 440 mm min 146 x 103 mm Size trimmed: max 310 x 420 mm min 140 x 100 mm Product thickness: max 70 mm min 3 mm Speed: max 6.600 c/h Dsdpfx Aodycmdofnskh Equipment: • infeed belt • automatic infeed with integrated pre stacker • electronic counter • external knife changing device • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table size extensions • 1 set of quick change cassettes standard size • 3 sets of cutting sticks

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Dkjdpfx Afjwpfv Ajnjh Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Dkodpfx Afekvnumsnjh Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number O-00951. Format: 820 mm Dkedjwnft Sjpfx Afnoh Equipment: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Dkjdpfov Nywvsx Afnjh Center Line II Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Condition: used, In this offer you purchase a used inkjet printing system "Canon VarioPrint i300" Object of sale: Dkodpfxstw Sk Ue Afnsh 1 x Canon VarioPrint i300 with the following equipment: The exact equipment can be found in the attached PDF document. Meter readings: Total: Approx. 166,100,000 Condition: The machine has been continuously serviced by Canon. Maintenance certificates available. A certified disassembly was carried out by Canon. The machine was restored to its delivery condition. A final test ran flawlessly. The machine was then dismantled by Canon specialists and packed in wooden crates, which were also originally used for delivery by Canon. The sales price does not include (seaworthy) packaging, which is available for a deposit. The machine is our property and is NOT a brokerage transaction. This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function. Test printouts are shown. Packaging and dispatch: An inspection of the machine in Belgium is possible by arrangement. The machine is already packed in the original delivery boxes. Worldwide shipping possible on request! A deposit of €15,000 is charged for the packaging. This fee will be refunded upon return. For further information you can of course contact us personally.

Condition: used, Year of construction: 1981, machine/vehicle number: 5171754, Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Dkjdpjh Ax T Tsfx Afneh Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test