Band saw

Pilous ARG 235 Plus

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Bedpfxemftv Ro Aa Iedh Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254326, Offer 22407 Technical data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting thickness: - Normal steel: up to 4 mm - Stainless steel: up to 3 mm - Aluminum: up to 5 mm - Stroke rate: up to approx. 55/min - Table size: W 800 mm x D 800 mm - Working height: approx. 940 mm - Stops adjustable steplessly in length and degrees - Drive: 400 V / 4 kW - Oil capacity: 50 l - E-foot switch Bedpoif Aqvefx Aa Iedh - Space requirement: approx. W 800 mm x H 1250 mm x D 900 mm - Weight: approx. 700 kg

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 235° Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Capacity R 45°: 115° Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Bsdpfx Aozc Imisa Isdh Power: 1,5kW Length: 1930mm Width: 1610mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, PILOUS Dual-mitering bandsaw ARG 235 plus Includes special accessories: Powered chip brush, belt tension indicator Cutting range: Round: 90° - 45° + 45° + 60° Bdedpfxeilqh Eo Aa Ijh in mm: 235-165-185-115 Square: 90° - 45° + 45° + 60° in mm: 230-145-160-80 Rectangle: 90° - 45° + 45° + 60° in mm: 280 x 180 - 185 x 80 - 185 x 100 - 115 x 80 Main motor: 400 V, 50 Hz, 1.4 kW Pump motor: 400 V, 50 Hz, 0.05 kW Saw blade speed: 40/80 m/min. Saw band length: 2710 x 27 x 0.9 mm Working height from the clamping jaw: 900 mm Coolant tank: approx. 15 l Machine dimensions (min.): 1640 x 750 x 1400 mm Machine dimensions (max.): 1930 x 1610 x 2000 mm Machine weight: 295 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Bodpfx Aaonvdtce Iedh Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity Bsdpfx Aox Npiysa Iedh UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1987, control type: manual, degree of automation: manual, working width: 2,000 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, power: 7.5 kW (10.20 HP), overall weight: 2,600 kg, total length: 22,000 mm, total width: 27,000 mm, total height: 16,000 mm, cutting length (max.): 2,000 mm, throat depth: 300 mm, Hydraulic shear, cutting length 2050 mm, cutting capacity 4 mm, throat 300 mm, motor 7,5 KW, working high 800 mm, back gauge 1000 mm motorised, dimension 2700x2200x1600 mm, weight ca. 2600 kgs Bdodpfetwzctex Aa Ijh

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Press force 28 tons Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Bdodpsw Hyc Sofx Aa Ioh Weight 2000 kg Power 5 kW

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container Bdodpfxovk I Ave Aa Ieh - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 1998, pressure 120 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 155 mm throat 350 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 77.0 mm/sec Control "P 40" work height max. 878 mm table width 104 mm oil volume 150 l total power requirement 11.0 kW weight 7550 kg range L-W-H 3550 x 2150 x 2600 mm Bdjdpfjx Ni Ebox Aa Ish - in checked conditions - machinevideo - ?v=bUaEa_nHZ6E Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit "P40" * New price approx. 4.000 Euro * Control / movement of the backgauge - X axis (target/actual input) * Control / movement of the depth setting - Y axes (target/actual input) * Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z R axis) - 1x branded set of upper tools (split) - 1x branded Multi-V bottom die block - Lateral safety guard (hinged doors) - Rear safety guard (hinged door) - 1x free-moving 2-hand/foot control - Operating instructions (PDF)