Transfer machine

Pfiffner HYDROMAT HB32-574

Condition: good (used), Year of construction: 1969, 1 x Centrifuge Steimel S 3 Year of manufacture: 1969 with conical basket and lockable lid. Isdpsu Ttrvefx Aa Ioth The machine is in technically flawless condition. Technical data: Max. load: 50 kg / 20 l Speed: 1,000 rpm The machine can be inspected under power.

Condition: used, Year of construction: 1987, Technical details: Itedpfx Aasmf Aw Ao Ijh number of spindles: 8

Condition: not inspected (used), Hydromat HW25-714 Manufacturer: Pfiffner serial number: 5.07.021-1 (4,2m) number of pieces produced so far: approx. 7.800.000 pcs. Itjdpei Ewtuofx Aa Ijh footprint: 9m x 4m + control cabinet

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Itedpfx Aajv Raate Ish Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Itjdew Nqu Aepfx Aa Ish Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: excellent (used), Year of construction: 2016, 3x MACHINES : GM20CNC YEAR : 2016 DESCRIPTION: Machine with original NC Gildemeister SIEMENS SINUMERIK CNC 840D - CN slide station 4 and 5 - CN hydraulic pick-up, advance, rotation, stop - Double slide pos 6, - Mechanical cutting slide Fxtillqon - CN rework slide + 2 indexing tools - Micrometric slide pos3 - Central block control - 25 mm passage KNOLL HP + FILTRATION + COOLING pump type: FKA/2550 Dnj0ed KNOLL pallet chip conveyor Itedpovcmfaofx Aa Ioh Loader : - IEMCA PRA 52/38P

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h Iodpfxswnprxs Aa Ioth noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: used, Washing system from Steimel (Robot-Polar) The washing system works fully automatically. Incl. crane system. Iedju Rbfnspfx Aa Ieth

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm Itedju Idwbjpfx Aa Ish TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: new, empty load weight: 400 kg, maximum load weight: 1,600 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 350 mm, loading space volume: 1.3 m³, color: grey, construction height: 2,150 mm, working width: 1,810 mm, Manufacturer: Humbaur Type: Low loader Alu HA 202513 Perm. weight: 2000 kg Payload: 1600 kg Empty weight: 400 kg Box dimensions: 2510 x 1310 x 350 mm with tarpaulin PCC gray and bows 160 cm Clearance height Tires: 13 inch Loading height: 525 mm with folding front wall with tarpaulin gray and bows, 160 cm clearance height, Made in Germany Only a high-quality truck tarpaulin is used (680 g/m). The tarpaulin color is freely selectable (on request we will gladly send you a color chart by email). Special sizes and designs can be offered at any time. Lettering available in stencil screen or digital printing. We would be happy to make you an individual offer. - V-drawbar hot-dip galvanized - 13-pin plug - 15 mm thick floor plate - side walls made of anodized aluminium - flap(s) with recessed locks - 6 lashing rings integrated in the side walls, tensile force 400 kg per lashing ring, Dekra tested - Humbaur multifunctional lighting integrated in the underride guard HA low loaders from the Humbaur brand are built with a unique frame/side wall construction made of stable and anodized aluminium. The special wooden floor with multiple waterproof gluing, anti-slip phenolic resin coating and 15 mm thickness is equipped for all purposes. Thanks to the outstanding design, the floor is inserted into the side walls and can be easily replaced if damaged. The high-quality materials, such as the hot-dip galvanized drawbars, and the careful workmanship make it a reliable and durable transport aid. Whether for transporting motorcycles, bicycles or garden tools, its wide range of accessories makes it extremely versatile. Our HA model will impress you with its multifunctionality. Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, high tarpaulin, support wheel, marker lights, V-drawbar hot-dip galvanized, braked, incl. guarantee, 13-pin plug, floor plate 15 mm thick, side walls made of anodized double-walled aluminium profile, flap(s) with recessed locks, 6 lashing rings integrated in the side walls, tractive force 400 kg per lashing ring, Dekra tested Itodpfx Aed T Sr Isa Ieh