Tool

Peddinghaus Exzentermatrizen

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm Kledpfx Asb U Hwpobljt total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Kljdpfxjftdh Ij Abljt Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, Ksdpfxshpktvo Ablslt - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Kodogbfaxepfx Ablelt Max. Drilling Capacity (mm) Ø40 mm

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Kledpfx Aevbcxtsblot Movie available

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm Ksdpfod N H A Njx Ablelt weight of the saw approx. 1400 kg good condition

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Kljdpsfy T H Ijfx Ablot Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Kodpfx Abodrtalelelt Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Kedpfohl H Ubjx Ablolt

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver Kljdpfx Abswh Ulqjlst 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor