Plate shears

OSTAS ORGM 1350 x 3

Condition: new, Year of construction: 2025, CFM-01 MACHINE FOR CUTTING PROFILES The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles. Gbodpefwxxnefx Ag Rjg

Condition: new, sheet width 2050 mm plate thickness 3 mm Gbedpfefv H Dkex Ag Reg distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Gsdpsur Hfzefx Ag Rsbg

Year of construction: 2021, condition: new, OSTAS PLATE ROLLER TYPE 4R OHS 1570 X 200 - 4 Rolls - Capacity 1570 x 9 - Hardened rollers - Diameter above roll 200 mm - Diameter under roller 200 mm - Diameter side roll 180 mm - Hydraulic system - Digital display for movement left roller - Digital display for movement middle under roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roll positioning - Hydraulic up and down movement system with middle and side rolls - Hydraulic balancing system - Overload protection - Documentation - 400V CALL FOR MORE INFO DUTCHMACH Gbjdpfsgg N R Hjx Ag Reg Metalworking machines ENSCHEDE

Condition: good (used), Year of construction: 1986, machine/vehicle number: 8618030, Offer 25182 Technical Data: Gbedpfxowq It Ts Ag Rog - Max. working width: 2040 mm - Max. material thickness: 4 mm - Roller diameter each: 140 mm - Stroke: 70 mm - Rear roller and bottom roller adjustable for conical bending - Upper and lower rollers driven by motor - Working speed right + left: 6 m/min - Drive: 380 V / 6.2 kW - Space requirement approx.: W 3560 x H 1100 x D 870 mm - Weight approx.: 1700 kg - With: - asymmetrical roller arrangement - crown-turned naturally hardened rollers - manual adjustment of rear rollers - pre-bending - pivotable top roller - electric foot switch for right and left rotation

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm Gbodjtpnpljpfx Ag Reg - Weight approx. 4500 kg

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Gsdpfx Agod R Er Do Rsbg Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: new, Year of construction: 2025, OSTAS PRE-MACHINERY Gbedpfx Agsgg Nrks Rjg TYPE KM 1,2 - Capacity 1,2 mm - Unloading 250 mm - With 8 sets of rolls CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg Gbodpfxsgg N Hbe Ag Reg - 400V

Condition: good (used), Year of construction: 1990, 4-shaft shredder from the well-known manufacturer Untha, type RS 30. 2 x 7.5 kW. The gearbox was overhauled and new cutter discs were installed on the shredder 3 years ago. Since then, it has hardly been used. Repair costs amounted to €5,300. Gbedpfx Aoxpn Hnsg Reg