Wire Eroding Machine

ORION SE600

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Nljdpfx Aaepy Erre Esk

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Njdjw Ucyuspfx Aa Eslk Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Technical details: max. ram stroke: 250 mm workpiece diameter - max.: 80 mm Nsdow Au I Iepfx Aa Eelk max. workpiece length: max. 900 total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, rotary table diameter: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, Used 5-axis universal traveling-column machining center with Heidenhain TNC-530 CNC, Njdpexixn Nsfx Aa Eelk swivel head, integrated rotary table.

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min Nlodpfx Aow Dvkaoa Eok --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Special Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Nledpfx Aasub Umqo Eok Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Njdpfx Aaowzyr Aj Eolk Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2008

Condition: used, Gate valve vacuum pump Condition: Nljdpfx Aaectlqbo Eok Inside and outside absolutely as good as new, overhauled and repainted Warranty: 12 months Manufacturer: Leybold Type: DK 100 Make No.: 11106 Motor: 400V DS Operating medium: mineral oil Included: Instruction manual Oil mist separator optional Delivery time: on request Photo shows a reconditioned DK200

Condition: refurbished (used), Year of construction: 2001, NICE MACHINE REFURBISHED Nljdpfx Ajxc Elhja Esk

Condition: used, We offer you Oerlikon Leybold DK 200 WSU 1001H. The pump is used. If you are interested, simply send us a message. We will then get in touch with you. Nsdpfx Aerf T D Sja Eelk