110 kVA emergency generator

Newpower Generator NWR125 Ricardo Motor Newpower Generator

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR125 Ricardo Motor Newpower generator generator set Continuous power: 110 kVA / 88 kW Maximum power: 120 kVA / 96 kW Engine : Kofo RIcardo R6105ZLDS, 6 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3030x1130x1510 mm Weight: approx. 1619kg Diesel tank: 125 L At 100% load: approx. 23.2 L/h At 75% load: approx. 17.5 L/h At 50% load: approx. 11.8 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 250A automatic switch : € 1080 Sockets - On request Shipment: Tsdpfxomga Sve Akijd - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The generator is new, complete with control panel, diesel tank, exhaust, and batteries. Description: Model: NWR150 Ricardo Motor Newpower Generator Power Generator Continuous Power: 135 kVA / 108 kW Maximum Power: 150 kVA / 120 kW Engine: Kofo Ricardo R6105AZLDS, 6-cylinder water-cooled Connection: Power circuit breaker, 5-wire direct connection Frequency: 50 Hz Voltage: 400/230 V Including mechanical speed control, AVR, battery charger, soundproofing, coolant heater, Controller: Comap AMF8, grid feed-in Dimensions: 3030x1130x1810 mm Weight: approx. 1650 kg Diesel tank: approx. 245 L At 100% load: approx. 27.8 L/h At 75% load: approx. 18.1 L/h Tedpenkap Sefx Akied At 50% load: approx. 14.0 L/h Grid monitoring, grid feed-in, soundproof Ready for immediate use. Additional costs: 250A automatic switch: €1080 plus VAT. Socket outlets - Upon request Shipping: Worldwide transport including unloading is possible at an additional cost. To provide an exact freight price, please send us an inquiry with your data and full address.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 80 kW (108.77 HP), number of axes: 2, overall weight: 172 kg, table length: 900 mm, table width: 600 mm, Equipment: documentation/manual, A mid-sized CNC laser machine designed to work continuously for small, medium, or large production. This model features a lifting table, giving you additional product options. A Wattsan laser cutter will be an essential assistant for your business. Effective and fast. Wattsan 6090 LT can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. The lifting table function allows lowering the working area up to 16 mm, so the rotary device may be installed to diversify your production. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 6090 LT characteristics Working area: 600x900 mm Laser power: 90-100 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1030 x 1490 x 670 mm + if it is on wheels 315 mm Packing size: 1110 x 1580 x 755 mm Weight: 230 kg Tjdpfsiim Unsx Akisd Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2018, condition: ready for operation (used), An ultrasonic cutting machine is offered. 180mm full-wave titanium blade, cutting shapes: rectangular, triangular, diamond-shaped, round products, sheet dimensions X/Y: min. 300mm/200mm max. 600mm/400mm, round products: min. 220mm max. 260mm, cutting height max.: 120mm, production capacity: approx. 120sheets/h, integrated cleaning station and drying function. Inspection possible by appointment. Todpsyugmljfx Akijd

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR75 Ricardo Motor Newpower generator generator set Continuous power : 60 kVA / 48 kW Maximum power: 66 kVA / 52 kW Engine: Kofo RIcardo N4105ZDS, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2430x1030x1260 mm Weight: approx. 1166kg Diesel tank: 125 L. Network monitoring, network feed-in, soundproofed Ready for immediate use. Todpfx Akemdqw Esijd additional costs 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW Tjdpfxjfbgz Ij Akiod fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Tjdpfouz If Nex Akiod Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Todpfx Aon Nv H Sskisd Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Year of construction: 2026, condition: new, SoloBaker's superb NEW BCS 201 vertical cake and pie slicer. Universal automatic knife slicer with a rotary table designed for slicing all kinds of cakes and pies. The solid construction, precise drive system, automatic cleaning, blades heating and adjustable cutting head speed give almost unlimited possibilities to adapt the device to the selected product. In combination with the affordable price and small dimensions, the slicer is a good and economical solution for small and large patisserie enterprises. Dimensions 130 x 110 x H 148cm. Power consumption 1,2 kw. Voltage: Single phase 230V 50Hz with voltage stabilizer. Required air connection 0.6-0.8 MPa and a flow rate of 200-300 l/min (depending on the cutting speed). Vertical automatic cake and pie slicer (cutting machine) with a rotary table designed for fast slicing of all types of cakes and pies without compromising their attractive appearance and structure into square and triangular portions. With the help of a PLC, the touchscreen allows easy setting of the parameters of the cut part (s) and the built-in microprocessor allows to store up to 20 cutting programs in memory. The cover of the machine is made of stainless steel. The 9L air tank is built into the machine at the front part. The double blades of the knives are made of food grade stainless steel and have a precise drive system and an automatic system for cleaning and heating the blades and an adjustable cutting speed allow the machine to cut various cakes and pies to an effective height 80 mm. Most important functions: Todpfohabdpsx Akijd - The double blade knife, vibrating in the opposite direction, makes cutting cakes smooth and clean. - Anti-slip rotary table (40x60cm) with a rectangular tray can be easily replaced by 2 round trays (diameter each 30 cm). - Slicing 2 round cakes at the same time. - Locking wheels make it easier to transport the machine to the desired location. - Induction system for heating the knife up to a temperature of 100°C ensures an even cut of hard glaze, chocolate and other similar surfaces. - High degree of accuracy of cutting parameters is achieved by means of two servomotors, which ensure precise operation of knives and table rotation. - Cake pieces are obtained with the same weight, shape and volume, which eliminates the need for additional control. - The speed of lowering and lifting the knife is set according to the characteristics of a particular product - this will allow you to achieve maximum productivity. - Electronic air pressure control ensures smooth and accurate machine operation. - High quality automatic knife cleaning system maintains the perfect appearance of the cut product and eliminates the need to wipe it by hand before each cutting. The cleaning system includes mechanical removal of product residues by a return slider (bar) and a stream of air into a special collection tank. - Residue collection containers eliminate the need for frequent cleaning of the machine and the surrounding work area.. - The machine makes up to 40 cuts per minute. - PLC & touchscreen Siemens. - Built-in voltage stabilizer for stable operation of the electronics and servomotors. CUTTING RANGE: Round cake/pie with a diameter of 15-30 cm - cut into triangles into 2/4/6/8/10/12/14 equal parts. Rectangular cake/pie up to 60 cm x 40 cm - cut into rectangular or triangular shapes. 1 Year Warranty

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Tjdpfx Akjwwq Hceied Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk