Multicracker MC370

Multicracker MC370

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Duodpfxowcwbqe Akksw

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning, in very good condition. Duodpfofg Iphox Akkow Filter area: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power: 22 kW; volume flow: 6700 m³/h; pressure: 8000 Pa Compressed air valves: ASCO 24 Volt Number of filter pockets: 48 Filter medium: no longer available Insulation: Yes With differential pressure measurement Dimensions L/W/H: 3000 mm / 1700 mm / 2100 mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available: Stainless steel cooling screw conveyor, diameter 400 mm, length 4100 mm.

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Duedpfx Akehn S Efjksw Opening at bulk top: 700 x 700 mm One side at wheels

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards Duedpfx Aksx Ac Rbokew ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Year of construction: 2017, condition: excellent (used), Included: screw conveyor; vibrating conveyor pipe with vibration motor drive. Total height: approx. 9250 mm Effective conveying height: 5800 mm Outer diameter: Ø 1200 mm Conveyor cross section: 300 x 100 mm Feeding height: approx. 1650 mm (machine) approx. 3100 mm (incl. support) discharge height: approx. 8900 mm (incl. support) number of spiral shelves: approx. 32 pieces Dedpfxoinwfij Akkouw heat exchanger surface: approx. 27,5 m² number of cooling/heating circuits: 32 pieces Material: stainless steel So far in use for conveying and cooling of granules and glass fibers (approx. 2.5 t/h) Free loading; Currently, the device can still be viewed built in operation.

Year of construction: 2024, condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-8 ton / hour. Flyer at the bottom of this page. Milling trials are possible. Dusdpfx Ajg Ugbrokkow

Condition: good (used), 1 x Ruhle dicer with outfeed conveyor. Set up for 6mm dice. Duedpeukgzgjfx Akkow Video available on request.

Condition: used, functionality: fully functional, Capacity will depend on the product to be used. Dodpfewny Spjx Akkouw

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Dujdot R Tr Sjpfx Akkew

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: RAD 864/900 - AB49038, cooling capacity: 1,113 kW (1,513.26 HP), type of input current: three-phase, type of cooling: water, overall weight: 8,449 kg, input voltage: 400 V, pressure: 6 bar, temperature: 21 °C, volume flow: 192 m³/h, pump pressure: 3.27 bar, total width: 2,124 mm, total length: 6,600 mm, total height: 3,180 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Cooling Tower, air-cooled Type: Cooling Tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD units are complete compact water cooling towers suitable for outdoor installation. Includes pump, water treatment system for biocide and stabilizer, and control and switch cabinet. Cooling capacity kW: 1113 Chilled water temperature outlet/inlet °C: 27 / 32 Flow rate m³/h: 192 Duodpfxewmb T Es Akkjw Available pump pressure Bar: 3.27 Wet bulb temperature °C: 21 Air flow rate m³/h: 97,200 Sound pressure at 10m (free field) dB(A): 64 Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. current consumption (A): 125 Max. power consumption (kW): 86.6 Dimensions: Length mm: 6,600, Width mm: 2,424, Height mm: 3,180 Weight (transport/operating) kg: 4,194 / 8,449 Connection DN 150 Reference: AB 9038 Year of manufacture: 2024 Condition: Visual 1, Technically OK & tested Test facility, as new Price: on request in Euro (plus VAT ex works Nettetal) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau