Profile steel shears, hand-operated

MUBEA 5 SN/8 R

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Approximate technical data: - Pressing force: 30 tons - Maximum sheet thickness: 10 mm - Maximum punching diameter: 105 mm Ppodpfx Ajlnkc Ujl Nsu - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke: 7 - 70 mm - Overhang: 560 mm - Maximum stroke rate: 120 strokes/min - Single stroke / continuous stroke - Drive: 400 V / 4 kW - Space requirement (approx.): W 8000 x H 1850 x D 1700 mm - Weight (approx.): 1900 kg - Includes: - Stop table with stops - Foot pedal - Emergency stop button - Quick tool change device - Various punch and die holders

Condition: good (used), Year of construction: 1992, machine/vehicle number: 9207102, Offer 12001 Technical data: Psdpfx Alji Hpmts Nspu - Material thickness: 1.25 mm - Max. overhang: 180 mm - Center distance between rollers: 63 mm - Max. material thickness with a tensile strength of 40 kg/mm²: 1.25 mm - Working speed, approx.: 6 + 12 m/min - Drive: 400 V / 0.7 / 0.85 kW - Space requirement, approx.: W 550 x H 1250 x D 1000 mm - Weight, approx.: 120 kg - Includes: - E - foot pedal

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg Pjdefn Aqlopfx Al Nspu coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Ppedpfevuucksx Al Nju

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm Ppjdpfx Aov T Uvzol Neu This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Pjdpfefv H Edox Al Njpu Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, Year of construction: 2026, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Bending angle: 145 degrees Cutting along the entire working length, Psdob Na Eqopfx Al Nepu Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, We are looking forward to your contact!

Condition: new, Working width: 4010 mm Bending capacity (St42): 2.0 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 2.2 kW Weight, approx.: 5000 kg Dimensions LxWxH, approx.: 5600 x 1750 x 2050 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Ppedpfx Alop Dufze Nsu Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set: Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: ready for operation (used), Year of construction: 1951, Large working width: 1250 mm for sheets up to: 1.75 mm opening width of upper beam: 70 mm Ppodpfsv D E R Dox Al Nou adjustability of bending beam: 50 mm space required: 1880 x 740 x 1140 mm

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Ppodeuk Niyopfx Al Nju Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Clamping plate diameter 1000 mm Rotation 2.2 kW Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote